Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,288Inspections Most recent open 2026-07-24 Last loaded 2026-07-29

OSHA Inspection: VALCON STEEL CORP.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of VALCON STEEL CORP. in 3257 HEMPSTEAD TURNPIKE, LEVITTOWN, NY 11756 (NAICS 238120). OSHA activity number 339757668.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Valcon Steel Corp. — free Get an email when a new federal OSHA severe-injury report for Valcon Steel Corp. is published. One employer, no account, unsubscribe in one click.
Establishment
VALCON STEEL CORP.
Site address
3257 HEMPSTEAD TURNPIKE
City
LEVITTOWN
State
NY
ZIP
11756
Mailing
4 SEABRO AVENUE, AMITYVILLE, NY 11701
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238120
Employees
10
Ownership type
A

4 citations on file for this inspection.

1926.95 A

Serious Gravity 1 1 instance 1 exposed
Issued
May 23, 2014
Penalty
Initial $1,200 · Current $600 Reduced
29 CFR 1926.95(a): Personal protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, was not provided, used, or maintained in a sanitary and reliable condition it was necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation, or physical contact.    a) worksite - An employee was heating a bolt with a torch without using face protection; on or about 05/07/2014.    Note:   Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (2)
  • — I (S) $600
  • — Z (S) $1200

1926.453 B02 IV

Serious Gravity 10 1 instance 2 exposed
Issued
May 23, 2014
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1926.453(b)(2)(iv): Employee(s) working in an aerial lift were sitting or climbing on the edge of the basket:    a) Worksite, Southwest Corner - Employees working approximately 39 feet 8 inches above the ground from a JLG 600S, Serial # 0300166239 aerial lift were climbing and sitting on the guardrails; on or about 05/07/2014.    Note:   Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1926.453 B02 V

Serious Gravity 10 1 instance 2 exposed
Issued
May 23, 2014
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift:    a) Worksite, Southwest Corner - An employee repositioning a metal beam from a JLG 600S, Serial # 0300166239 aerial lift, approximately 39 feet 8 inches above the ground, was wearing a harness and a lanyard. The employee had both ends of the lanyard attached to himself; on or about 05/07/2014.    Note:   Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

1926.760 A01

Serious Gravity 10 1 instance 1 exposed
Issued
May 23, 2014
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1926.760(a)(1): Each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level was not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems, or fall restraint systems.    a) Worksite, Southwest Corner - An employee handing employees tools approximately 39 feet 8 inches above the ground was wearing a harness but did not attach his lanyard to any anchor, or lifeline; on or about 05/07/2014.    Note:   Because abatement of this violation is already documented in the case file, the employer need not submit certification or documentation of abatement for this violation as normally required by CFR 1903.19.
Recent events (2)
  • — I (S) $1400
  • — Z (S) $2800

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339757668.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.