BLUE LAKE, CA —
OSHA Inspection: BLUE LAKE CASINO
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BLUE LAKE CASINO in 777 CASINO WAY, BLUE LAKE, CA 95525 (NAICS 713210). OSHA activity number 339760340.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BLUE LAKE CASINO
- Site address
- 777 CASINO WAY
- City
- BLUE LAKE
- State
- CA
- ZIP
- 95525
- Mailing
- P.O. BOX 428, BLUE LAKE, CA 95525
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 713210
- Employees
- 28
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.37 B02
- Issued
- Jun 25, 2014
- Penalty
- Initial $3,000 · Current $2,250 Reduced
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": Shop: On or about May 6, 2014 and at times prior thereto, there was no exit sign leading to the designated egress.
Recent events (2)
- — I (S) $2250
- — Z (S) $3000
1910.178 P01
- Issued
- Jun 25, 2014
- Abate by
- Jul 15, 2014
- Penalty
- Initial $4,000 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.178(p)(1): Powered industrial truck(s) found to be in need of repair, defective, or in any way unsafe had not been taken out of service until restored to safe operating condition(s): Shop: On or about May 6, 2014 and at times prior thereto, the Hyster 50 forklift did not have working stop lights, no audible back up sound and the amber rotating warning sign did not work.
Recent events (2)
- — I (S) $3000
- — Z (S) $4000
1910.212 A01
- Issued
- Jun 25, 2014
- Abate by
- Jul 15, 2014
- Penalty
- Initial $4,000 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Shop: On or about May 6, 2014 and at times prior thereto, the Drill Press, Model Craftsman RDX 1074 was not guarded. It was used for drilling holes in steel brackets and signs.
Recent events (2)
- — I (S) $3000
- — Z (S) $4000
1910.215 A04
- Issued
- Jun 25, 2014
- Abate by
- Jul 15, 2014
- Penalty
- Initial $4,000 · Current $3,000 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: Shop: On or about May 6, 2014 and at times prior thereto, the 8 inch Palmgren Bench Grinder measured 9/16 inch at the work rest. It did not have the wheel adjusted to one- eighth inch from the work rest.
Recent events (2)
- — I (S) $3000
- — Z (S) $4000
1910.215 B09
- Issued
- Jun 25, 2014
- Abate by
- Jul 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: Shop: On or about May 6, 2014 and at times prior thereto, the 8 inch Palmgren Bench Grinder measured one and one quarter inch at the tongue guard. It did not have the tongue guard adjusted to one-quarter inch to the wheel.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B02
- Issued
- Jun 25, 2014
- Abate by
- Jul 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: Shop: On or about May 6, 2014 and at times prior thereto, relocatable power taps were affixed to the wallboard and storage rack which and used as fixed wiring to charge batteries and provide power for a lamp which exposed employees to electrical hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G01 IV A
- Issued
- Jun 25, 2014
- Abate by
- Jul 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure Shop: On or about May 6, 2014 and at times prior thereto, flexible cord was used in place of fixed wiring for providing power to the refrigerator for at least four months exposing employees to electrical hazards. Shop: On or about May 6, 2014 and at times prior thereto, flexible extension cord was used in place of fixed wiring for providing power to the microwave and toaster for at least four months exposing employees to electrical hazards.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Blue Lake Casino
View Blue Lake Casino's full OSHA safety record →
More inspections in this industry (NAICS 713210)
More inspections in CA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339760340.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.