WESTBOROUGH, MA ·
OSHA Inspection: ASC MECHANICAL, INC
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of ASC MECHANICAL, INC in 310 TURNPIKE RD, WESTBOROUGH, MA 01581 (NAICS 238220). OSHA activity number 339760670.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ASC MECHANICAL, INC
- Site address
- 310 TURNPIKE RD
- City
- WESTBOROUGH
- State
- MA
- ZIP
- 01581
- Mailing
- 4 FIELD ST, MAYNARD, MA 01754
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238220
- Employees
- 5
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1926.501 B01
- Issued
- May 14, 2014
- Abate by
- May 20, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: (a) 310 Turnpike Rd Westborough, MA: On or about April 18, 2013, an employee was working at the edge of the roof on this commercial building more than 25 Ft above the ground below without any fall protection: Specific abatement documentation that this violation has been corrected must be provided within 10 days of the abatement in accordance with 29 CFR 1903.19(d)(1).
Recent events (2)
- · I (S) $2800
- · Z (S) $2800
1926.503 A01
- Issued
- May 14, 2014
- Abate by
- May 27, 2014
- Penalty
- Initial $1,200 · Current $0 Reduced
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee who might be exposed to fall hazards that enabled each employee to recognize the hazards of falling and/or the procedures to be followed in order to minimize these hazards: (a) 310 Turnpike Rd Westborough, MA: On or about April 18, 2014, an employee working on this roof was not trained on the procedures to be followed to minimize the hazards of working at the edge on a flat rubberized roof surface.
Recent events (2)
- · I (S) $0
- · Z (S) $1200
1926.1053 B01
- Issued
- May 14, 2014
- Abate by
- May 20, 2014
- Penalty
- Initial $2,000 · Current $200 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): When portable ladders are used for access to an upper landing surface, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access: (a) 310 Turnpike Rd Westborough, MA: On or about April 18, 2014, an employee was observed using a portable ladder to access the upper roof surface that did not extend any distance past the landing surface.
Recent events (2)
- · I (O) $200
- · Z (S) $2000
1926.1053 B04
- Issued
- May 14, 2014
- Abate by
- May 20, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.1053(b)(4): Ladders were not used only for the purpose for which they were designed: (a) 310 Turnpike Rd Westborough, MA: On or about April 18, 2014, an employee was observed using an unopened A frame ladder to access the upper roof surface, contrary to the instructions printed on the ladder that states to use (the ladder) only in the fully open position.
Recent events (2)
- · I (O) $0
- · Z (S) $0
More inspections in this industry (NAICS 238220)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339760670.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.