OSHA Inspection: TAYLOR PUMP REPAIR, INC.

Issued

2014-07-02 00:00:00

Abate by

2014-07-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l):  (a) On or about 05/08/2014 - Receiving area, employees were operating a forklift without completing training.

Issued

2014-07-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  (a) On or about 05/08/2014 - Shop area, the Cadillac horizontal metal lathe, model #X2180, serial #2260, was not guarded.  (b) On or about 05/08/2014 - Shop area, the ENCO vertical mill, model #F1598, serial #100, was not guarded.

Issued

2014-07-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one-eighth inch:  (a) On or about 05/08/2014 - Shop area, employees were operating a DAYTON bench-mounted grinder, model #2LMR9, that had the work rest adjusted 1.75 inches from the wheel.

Issued

2014-07-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel:  (a) On or about 05/08/2014 - Shop area, employees were operating a DAYTON bench-mounted grinder, model #2LMR9, that did not have a tongue guard installed.

Issued

2014-07-02 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.303(b)(1)(ii): Electrical equipment was not free from recognized hazards, based on the mechanical strength and durability, including, for parts designed to enclose and protect other equipment, the adequacy of the protection thus provided:  (a) On or about 05/08/2014 - Shop area, the protective conduit was broken on a transfer motor exposing the insulated wires.

Issued

2014-07-02 00:00:00

Abate by

2014-07-15 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check:  (a) On or about 05/08/2014 - Shop area, four portable fire extinguishers were not checked annually for maintenance.