GULFPORT, MS —
OSHA Inspection: METAL TECH, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of METAL TECH, INC. in 10151 LORRAINE RD., GULFPORT, MS 39503 (NAICS 332999). OSHA activity number 339762650.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- METAL TECH, INC.
- Site address
- 10151 LORRAINE RD.
- City
- GULFPORT
- State
- MS
- ZIP
- 39503
- Mailing
- 10151 LORRAINE RD., GULFPORT, MS 39503
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 53
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.212 A01
- Issued
- Jul 29, 2014
- Abate by
- Aug 15, 2014
- Penalty
- Initial $2,380 · Current $1,428 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. a) Horizontal band saw - On or about May 8, 2014, the unused portion of the horizontal band saw blade was not guarded.
Recent events (2)
- — I (S) $1428
- — Z (S) $2380
1910.212 A01
- Issued
- Jul 29, 2014
- Abate by
- Aug 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. a) Radial arm drill - On or about May 8, 2014, the drill bit on the radial arm drill was not guarded against contact.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B01
- Issued
- Jul 29, 2014
- Abate by
- Aug 15, 2014
- Penalty
- Initial $1,785 · Current $1,071 Reduced
General-duty citation text
29 CFR 1910.303(b)(1): Electrical equipment was not free from recognized hazards that were likely to cause death or serious physical harm to employees, in that the employer did not ensure the safety of the equipment pursuant to the considerations in sections (i) through (viii) of 29 CR 1910.303(b)(1): a) Hydraulic brake press - On or about May 8, 2014, the electrical conduit for the hydraulic brake press light curtain was broken and separated. One part of the conduit was supported by the light curtain wiring that was inside the conduit.
Recent events (2)
- — I (S) $1071
- — Z (S) $1785
1910.179 L03 III D
- Issued
- Jul 29, 2014
- Abate by
- Aug 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.179(l)(3)(iii)(d): Pendant control stations were not kept clean, and/or their function labels were not kept legible. a) Overhead cranes - on or about May 8, 2014, the pendant functioning controls for the overhead cranes were not labeled. The labels had worn away.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Metal Tech, INC.
View Metal Tech, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332999)
More inspections in MS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339762650.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.