Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: CJ MAHAN CONSTRUCTION COMPANY

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of CJ MAHAN CONSTRUCTION COMPANY in 1297C SMITHLAND DAM RD, SMITHLAND, KY 42081 (NAICS 237310). OSHA activity number 339770000.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch CJ Mahan Construction Company — free Get an email when a new federal OSHA severe-injury report for CJ Mahan Construction Company is published. One employer, no account, unsubscribe in one click.
Site address
1297C SMITHLAND DAM RD
City
SMITHLAND
State
KY
ZIP
42081
Mailing
3400 SOUTHWEST BLVD, GROVE CITY, OH 43123
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Case closed
Last modified
Data loaded
NAICS code
237310
Employees
300
Ownership type
A

6 citations on file for this inspection.

1926.20 B03

Deleted Serious Gravity 1 3 instances 3 exposed
Issued
Sep 30, 2014
Abate by
Oct 27, 2014
Penalty
Initial $3,000 · Current $0 Reduced
29 CFR 1926.20(b)(3): Machinery, tool(s), material(s), or equipment which was not in compliance with the applicable requirement(s) of 29 CFR 1926 was not prohibited, and/or was not either identified as unsafe by tagging, or locking the controls to render them inoperable, or physically removed from its place of operation.  a) Top (Electrical/Mechanical Area) - On or about 5/15/14, employees were exposed to struck by hazards when an unguarded portable grinder was not tagged out.   b) Tool Box Room (Conex Row) - On or about 05/15/2014, employees are exposed to electrical hazards when industrial fan plug with missing ground prong was not tagged out of service.  c) Smithland Dam (Hill) - On or about 5/15/14, damaged wooden shovels with splinters and a broken handle was not tagged out.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $3000

1926.20 B04

Deleted Serious Gravity 5 1 instance 3 exposed
Issued
Sep 30, 2014
Abate by
Oct 27, 2014
Penalty
Initial $6,000 · Current $0 Reduced
29 CFR 1926.20(b)(4): The employer did not ensure that the employee(s) required to operate equipment and machinery was qualified by training or experience.  a) Hardfill Placement Area (Smithland Dam) - On or about 5/15/2014, employees were exposed to struck by hazards when an operator was not trained on using the Caterpillar 299D Compact Track Loader with a jib (material handling arm) attachment to lift 1600lb-1800lb concrete blocks.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $6000

1926.250 A01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Sep 30, 2014
Abate by
Oct 27, 2014
Penalty
Initial $6,000 · Current $0 Reduced
29 CFR 1926.250(a)(1): Materials stored in tiers were not stacked, racked, blocked, interlocked, or otherwise secured to prevent sliding, falling or collapse  a) Southside below Hardfill - On or about 5/15/14, employees were exposed to crushing hazards when 1800lb concrete blocks were double stacked on a sloped unstable ground of sand.   In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $6000

1926.701 B

Deleted Serious Gravity 1 1 instance 3 exposed
Issued
Sep 30, 2014
Abate by
Oct 27, 2014
Penalty
Initial $3,000 · Current $0 Reduced
29 CFR 1926.701(b): All protruding reinforcing steel, onto and/or into which employees could fall or come against, was not guarded to eliminate the hazard of impalement.  a) Smithland Dam (Top upper level) - On or about 5/15/14, employees were exposed to impalement hazards when working near uncapped protruding rebar.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (S) $0
  • — Z (S) $3000

1926.150 A04

Deleted Other-than-serious 1 instance 1 exposed
Issued
Sep 30, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.150(a)(4): All firefighting equipment shall be periodically inspected and maintained in operating condition. Defective equipment shall be immediately replaced.  a)  Smithland Dam (Unit 2) - On or about 5/15/14, employees were exposed to fire hazards when the fire extinguisher on the manlift was not inspected monthly and recharged.  ABATEMENT COMPLETED
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1926.502 B01

Other-than-serious 1 instance 10 exposed
Issued
Sep 30, 2014
Abate by
Oct 27, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.502(b)(1): The top edge height of the top rails, or equivalent guardrail system members, was not 42 inches (1.1 m) plus or minus 3 inches (8 cm) above the walking/working level:Note:  When employees are using stilts, the top edge height of the top rail, or equivalent member, shall be increased an amount equal to the height of the stilts.  a) On or about 5/15/2014, employees were exposed to fall hazards when a portion of the guardrails were not at an adequate height.  In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View CJ Mahan Construction Company's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339770000.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.