Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: TITAN STEEL CORPORATION

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of TITAN STEEL CORPORATION in 6333 KIRKVILLE ROAD, KIRKVILLE, NY 13082 (NAICS 332312). OSHA activity number 339770737.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Titan Steel Corporation — free Get an email when a new federal OSHA severe-injury report for Titan Steel Corporation is published. One employer, no account, unsubscribe in one click.
Site address
6333 KIRKVILLE ROAD
City
KIRKVILLE
State
NY
ZIP
13082
Mailing
PO BOX 10, KIRKVILLE, NY 13082
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Health
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332312
Employees
34
Ownership type
A

5 citations on file for this inspection.

1910.95 C01

Serious Gravity 5 2 instances 15 exposed
Issued
Jun 27, 2014
Abate by
Sep 1, 2014
Penalty
Initial $4,200 · Current $2,520 Reduced

Hazardous substances 8111

29 CFR 1910.95(c)(1): A continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (n) was not instituted when employee noise exposures equaled or exceeded an 8 hour time-weighted average sound level (TWA) of 85 dBA:      a) Finish Room, on or about 5/29/14: An employee working as a Grinder was exposed to continuous noise at a level of 134.7% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 134.7% dose is approximately 92.1 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 05/29/14 for 367 minutes. Exposure calculations include a zero increment for the 113 minutes not sampled. Employee was not wearing any type of hearing protection.     a) Fabrication Area, on or about 5/29/14: An employee working as a Welder in the Steel Area was exposed to continuous noise at a level of 90.0% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 90.0% dose is approximately 89.2 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 05/29/14 for 361 minutes. Exposure calculations include a zero increment for the 119 minutes not sampled. Employee was wearing ear plugs.
Recent events (2)
  • — I (S) $2520
  • — Z (S) $4200

1910.95 L01

Serious Gravity 1 1 instance 15 exposed
Issued
Jun 27, 2014
Abate by
Aug 1, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.95(l)(1): A copy of 29 CFR 1910.95 was not made available to affected employees or their representatives nor was a copy posted in the workplace:  a) Throughout the facility, on or about 5/29/14: The employer did not provide a copy of 1910.95 to the affected employees, or post a copy in the workplace, when employees were exposed to noise that exceeded the 8-hour time weighted average.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.157 G02

Serious Gravity 1 1 instance 25 exposed
Issued
Jun 27, 2014
Abate by
Aug 1, 2014
Penalty
Initial $2,100 · Current $1,260 Reduced
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter: a)  Throughout the facility, on or about 5/30/14: Training was not provided annually to employees on the use of fire extinguishers and the hazards involved with incipient stage fire fighting. Last training conducted was 7/10/12.          * ABATEMENT NOTE: By this date the employer must either correct the alleged violation or implement a Fire Safety Policy; as outlined in 29 CFR 1910.38(a) and .39 which includes the evacuation requirements of 29 CFR 1910.157(b).
Recent events (2)
  • — I (S) $1260
  • — Z (S) $2100

1910.37 B02

Other-than-serious 1 instance 2 exposed
Issued
Jun 27, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "EXIT":     a)  Finish Room, on or about 5/14/14: An exit door leading to the outside was not marked as an "Exit".
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

1910.1026 D01

Other-than-serious 1 instance 1 exposed
Issued
Jun 27, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.1026(d)(1): Each employer shall determine the 8-hour time weighted average (TWA) exposure for each employee exposed to chromium (VI):   a) Specialty Metal Shop, on or about 5/29/14: The exposure to chromium (VI) was not determined for employees conducting tig welding on Stainless Steel.
Recent events (2)
  • — I (O) $0
  • — Z (O) $0

View Titan Steel Corporation's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339770737.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.