Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,198,892Inspections Most recent open 2026-09-03 Last loaded 2026-09-07

OSHA Inspection: NORTH AMERICAN ELECTROLESS NICKEL INC.

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of NORTH AMERICAN ELECTROLESS NICKEL INC. in 776 LUNT AVE., ELK GROVE VILLAGE, IL 60007 (NAICS 332813). OSHA activity number 339779050.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch North American Electroless Nickel INC. for free Get an email when a new federal OSHA severe-injury report for North American Electroless Nickel INC. is published. One employer, no account, unsubscribe in one click.
Site address
776 LUNT AVE.
City
ELK GROVE VILLAGE
State
IL
ZIP
60007
Mailing
776 LUNT AVE., ELK GROVE VILLAGE, IL 60007
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332813
Employees
14
Ownership type
Private (A)

5 citations on file for this inspection.

1910.242 B

Serious Gravity 1 1 instance 5 exposed
Issued
Jul 24, 2014
Abate by
Aug 19, 2014
Penalty
Initial $1,200 · Current $1,200
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.:  (a) On or about May 23, 2014, employees of North American Electroless Nickel Inc. used compressed air greater than 30 p.s.i. to dry electroplated parts.  Air pressure measurements from the air nozzle read between 87 and 92 p.s.i.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • · I $1800
  • · Z $1800
  • · Z (S) $1200

1910.1200 F05 I

Serious Gravity 1 3 instances 4 exposed
Issued
Jul 24, 2014
Abate by
Aug 19, 2014
Penalty
Initial $1,200 · Current $1,200

Hazardous substances 18422260

29 CFR 1910.1200(f)(5)(i): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the identity of the hazardous chemical(s) contained therein:  (a) On or about May 23, 2014, North American Electroless Nickel Inc. did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the identity of the hazardous chemical(s) contained therein.  Tanks including, but not limited to the nickel strike, nickel boron nitride, and nickel rinse tank (presol 5140) were not labeled with the identity of the hazardous chemicals contained therein. Hazardous chemicals in these tanks include, but are not limited to: sodium hydroxide, nickel sulfate, and nickel chloride.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • · I $1800
  • · Z $1800
  • · Z (S) $1200

1910.1200 F05 II

Serious Gravity 1 3 instances 4 exposed
Issued
Jul 24, 2014
Abate by
Aug 19, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 18422260

29 CFR 1910.1200(f)(5)(ii): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked with the appropriate hazard warnings:  (a) On or about May 23, 2014, North American Electroless Nickel Inc. did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged, or marked with the appropriate hazard warnings.  Tanks including, but not limited to the nickel strike, nickel boron nitride, hydrochloric acid, and nickel rinse tank (presol 5140) were not labeled with the identity of the hazardous chemicals contained therein. Hazardous chemicals in these tanks include, but are not limited to: sodium hydroxide, nickel sulfate, hydrochloric acid, and nickel chloride.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • · I $0
  • · Z $0
  • · Z (S) $0

1910.1200 F09

Serious Gravity 1 1 instance 4 exposed
Issued
Jul 24, 2014
Abate by
Aug 19, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 2260

29 CFR 1910.1200(f)(9): The employer did not ensure that labels or other forms of warning were legible, in English, and prominently displayed on the container, or readily available in the work area throughout each work shift:  (a) On or about May 23, 2014, North American Electroless Nickel Inc. did not ensure that labels or other forms of warning were legible.  Tanks containing rinse water and alkaline solution were illegible impairing employee(s) ability to identify the hazard warnings and contents.  The tank containing presol 5340 (sodium hydroxide) was illegible, and impaired employees ability to identify the hazard warnings and contents of the chemicals contained therein.  In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
  • · I $0
  • · Z $0
  • · Z (S) $0

1910.1200 H03 IV

Other-than-serious 1 instance 11 exposed
Issued
Jul 24, 2014
Abate by
Aug 19, 2014
Penalty
Initial $0 · Current $0

Hazardous substances 1430184018602310

29 CFR 1910.1200(h)(3)(iv):   The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information:  (a) On or about May 23, 2014, North American Electroless Nickel Inc. did not train employees regarding the label elements including pictograms and the new 16 section safety data sheet format by December 1, 2013.  Employees were exposed to hazardous chemicals that include, but are not limited to: sulfuric acid, nitric acid, nickel chloride, and hydrochloric acid.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (3)
  • · I $600
  • · Z $600
  • · Z (O) $0

View North American Electroless Nickel INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339779050.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.