INDEPENDENCE, LA —
OSHA Inspection: CROSSOVER, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of CROSSOVER, INC. in 53251 CROSSOVER RD., INDEPENDENCE, LA 70443 (NAICS 333132). OSHA activity number 339780652.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- CROSSOVER, INC.
- Site address
- 53251 CROSSOVER RD.
- City
- INDEPENDENCE
- State
- LA
- ZIP
- 70443
- Mailing
- 53251 CROSSOVER RD., INDEPENDENCE, LA 70443
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333132
- Employees
- 70
- Ownership type
- A
Citations
7 citations on file for this inspection.
1910.212 A03 II
- Issued
- Jun 5, 2014
- Abate by
- Jun 19, 2014
- Penalty
- Initial $2,100 · Current $1,050 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Mill Area; the employer failed to ensure a American Hole Wizard drill press had a guard around the bit.
Recent events (2)
- — I (S) $1050
- — Z (S) $2100
1910.219 D01
- Issued
- Jun 5, 2014
- Abate by
- Jun 19, 2014
- Penalty
- Initial $3,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Manual Shop; The employer failed to ensure employees are protected from contact with unguarded pulleys. The unguarded pulley was on a Mazak 34 Lathe.
Recent events (2)
- — I (S) $0
- — Z (S) $3500
1910.219 E01 I
- Issued
- Jun 5, 2014
- Abate by
- Jun 19, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): a) Manual Shop; The employer failed to ensure employees are protected from contact with unguarded belts. The unguarded belt was on a Mazak 34 Lathe.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.305 B01 II
- Issued
- Jun 5, 2014
- Abate by
- Jun 19, 2014
- Penalty
- Initial $3,500 · Current $1,750 Reduced
General-duty citation text
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) Saw area; a 480 volt electrical panel had unused circuit openings. b) Machine shop; a 480 volt electrical panel had unused circuit openings.
Recent events (2)
- — I (S) $1750
- — Z (S) $3500
1910.305 B02 I
- Issued
- Jun 5, 2014
- Abate by
- Jun 19, 2014
- Penalty
- Initial $2,100 · Current $1,050 Reduced
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: a) Tractor shed; An electrical box was missing the cover. b) Mill area; An electrical box was missing the cover.
Recent events (2)
- — I (S) $1050
- — Z (S) $2100
1910.303 F02
- Issued
- Jun 5, 2014
- Abate by
- Jun 19, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose, nor located and arranged so the purpose was evident: a) The employer failed to ensure that the individual breakers inside the following electrical panels were labeled: 1. Old Maintenance Area; 110 and 220 volt electrical panel. 2. Manual shop electrical panel. 3. Machine shop small electrical panel.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H03 IV
- Issued
- Jun 5, 2014
- Abate by
- Jul 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(iv): Employee training did not include the details of the hazard communication program developed by the employer, including an explanation of the labeling system and the material safety data sheet, and how employees can obtain and use the appropriate hazard information: a) Throughout the facility; The employer failed to train employee(s) were trained on the new label elements and safety data sheet (SDS) format.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Crossover, INC.
View Crossover, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333132)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339780652.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.