TUSCUMBIA, AL —
OSHA Inspection: HI-TEMP, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HI-TEMP, INC. in 820 MISSISSIPPI ST, TUSCUMBIA, AL 35674 (NAICS 333220). OSHA activity number 339781007.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HI-TEMP, INC.
- Site address
- 820 MISSISSIPPI ST
- City
- TUSCUMBIA
- State
- AL
- ZIP
- 35674
- Mailing
- 820 MISSISSIPPI ST, TUSCUMBIA, AL 35674
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333220
- Employees
- 57
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Aug 20, 2014
- Abate by
- Sep 16, 2014
- Penalty
- Initial $3,500 · Current $2,100 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) On or about 05/21/14 - Machine shop, a Gall Meyer Lathe (D561) did not have a chuck guard installed. (b) On or about 05/21/14 - Machine shop, ECOCA Lathe (CNS Mark No 4014) did not have a chuck guard installed. (c) On or about 05/21/14 - Machine shop, THE Eagle CNC Lathe (SN 9868742419) did not have a chuck guard installed. (d) On or about 05/21/14 - Machine shop, the South Bend Lathe did not have a chuck guard installed.
Recent events (2)
- — I (S) $2100
- — Z (S) $3500
1910.305 A02 IX
- Issued
- Aug 20, 2014
- Abate by
- Aug 26, 2014
- Penalty
- Initial $2,800 · Current $0 Reduced
General-duty citation text
29 CFR 1910.305(a)(2)(ix): All lamps for general illumination were not protected from accidental contact or breakage by a suitable fixture or lamp holder with a guard: (a) On or about 05/21/14, machine shop, the fluorescent light on the Mitutoyo measuring machine, was not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $2800
1910.147 C01
- Issued
- Aug 20, 2014
- Abate by
- Sep 16, 2014
- Penalty
- Initial $700 · Current $420 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment is isolated from the energy source and rendered inoperative: (a) On or about 05/21/14 - Machine Shop, an energy control program was not been established or implemented for employees performing maintenance and servicing of machine shop equipment such as, but not limited to, CNC machines, lathes, milling machines and power presses.
Recent events (2)
- — I (O) $420
- — Z (O) $700
1910.178 L01 II
- Issued
- Aug 20, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a forklift: (a) On or about 05/21/14 - Machine Shop, the forklift operator did not receive training that included demonstrations by the trainer and operator; and evaluation of the operator's performance in the workplace.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.178 Q01
- Issued
- Aug 20, 2014
- Abate by
- Sep 2, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(1): Any power-operated industrial truck not in safe operating condition was not taken out of service, and/or repairs were not made by authorized personnel: (a) On are about 05/21/14 - plant number two, the lights on the Mitsubishi 2500-pound forklift were inoperative.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Hi-Temp, INC.
View Hi-Temp, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333220)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339781007.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.