SIMPSON, PA —
OSHA Inspection: DOYLE & ROTH MANUFACTURING COMPANY, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of DOYLE & ROTH MANUFACTURING COMPANY, INC. in 1 MORSE AVENUE, SIMPSON, PA 18407 (NAICS 332410). OSHA activity number 339786451.
Watch Doyle & Roth Manufacturing Company, INC. — free
Get an email when a new federal OSHA severe-injury report for Doyle & Roth Manufacturing Company, INC. is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- DOYLE & ROTH MANUFACTURING COMPANY, INC.
- Site address
- 1 MORSE AVENUE
- City
- SIMPSON
- State
- PA
- ZIP
- 18407
- Mailing
- 1 MORSE AVENUE, SIMPSON, PA 18407
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332410
- Employees
- 27
- Ownership type
- A
Citations
38 citations on file for this inspection.
1910.22 A01
- Issued
- Penalty
- Initial $2100.00 · Current $1530.00 Reduced
General-duty citation text
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, and service rooms were not kept clean and orderly and in a sanitary condition: a) Birdhouse Area: The floor space adjacent to the Cincinnati drill press was not kept clear of stock and scrap material exposing the operator to a trip hazard, on or about May 29, 2014. CORRECTED DURING INSPECTION CERTIFICATION NOT REQUIRED
Recent events (2)
- — I (S) $1530
- — Z (S) $2100
1910.23 A01
- Issued
- Abate by
- Penalty
- Initial $2800.00 · Current $2040.00 Reduced
General-duty citation text
29 CFR 1910.23(a)(1): Every stairway floor opening was not guarded by a standard railing constructed in accordance with paragraph (e) of this section: a) Warehouse Area: A stairway floor opening leading to the basement area was not guarded by a standard railing exposing workers to a fall, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2040
- — Z (S) $2800
1910.23 A05
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.23(a)(5): Every pit and trapdoor floor opening, infrequently used, was not guarded by a floor opening cover of standard strength and construction: a) Big Bay Area: A floor opening along the length of the operator's side of the big rolls exposed workers to a trip hazard, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.23 C01
- Issued
- Abate by
- Penalty
- Initial $2800.00 · Current $2040.00 Reduced
General-duty citation text
29 CFR 1910.23(c)(1): Every open-sided floor or platform 4 feet or more above adjacent floor or ground level was not guarded by a standard railing (or the equivalent as specified in paragraph (e)(3) of this section) on all open sides except where there is entrance to a ramp, stairway, or fixed ladder: a) Strip Cladding Platform: A platform constructed to provide access to the top of the strip cladding welder was not equipped with a standard railing exposing workers to a fall, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2040
- — Z (S) $2800
1910.23 E01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.23(e)(1): A standard railing did not consist of top rail, intermediate rail, and posts, with a vertical height of 42 inches nominal from upper surface of top rail to floor, platform, runway, or ramp level: a) File Storage Area: The guardrail along the edge of the platform outside of the file storage room was constructed with a top rail that was only 31 inches above the platform exposing workers to a fall hazard, on or about May 28, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.23 D01 III
- Issued
- Abate by
- Penalty
- Initial $2100.00 · Current $1530.00 Reduced
General-duty citation text
29 CFR 1910.23(d)(1)(iii): On stairways less than 44 inches wide having both sides open, one stair railing was not installed on each side: a) Basement Area: A set of stairs open on both sides that lead from the office area to the basement were not equipped with a guardrail on each open side exposing workers to a fall, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1530
- — Z (S) $2100
1910.36 E02
- Issued
- Abate by
- Penalty
- Initial $2100.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.36(e)(2): Doors that connect rooms to an exit route did not swing out in the direction of exit travel if the room is designed to be occupied by more than 50 people or if the room is a high hazard area (i.e., contains contents that are likely to burn with extreme rapidity or explode): a) Bird House: The exit door in the southwest corner of the bird house did not swing in the direction of travel, on or about May 29, 2014. b) Bird House: The exit door on the north side of the bird house did not swing in the direction of travel, on or about May 29, 2014. c) Old Men's Room: The exit door near the machine shop and fabrication area did not swing in the direction of travel, on or about May 29, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $2100
1910.110 C05 I D
- Issued
- Abate by
- Penalty
- Initial $2800.00 · Current $2040.00 Reduced
General-duty citation text
29 CFR 1910.110(c)(5)(i)(d): Valves on containers having a water capacity greater than 50 pounds (nominal 20 pounds LP-Gas capacity) were not protected while in use: a) Big Bay: The valve on a propane cylinder connected and used to supply liquid petroleum gas to a torch wand was not protected exposing workers to a fire and explosion hazard, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2040
- — Z (S) $2800
1910.133 A01
- Issued
- Abate by
- Penalty
- Initial $2100.00 · Current $1530.00 Reduced
General-duty citation text
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a) Fabrication Area: The employer does not ensure that employees who perform hand grinding are protected from flying metal chips by use of a face shield exposing the workers to the potential for an eye injury, on or about May 29, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1530
- — Z (S) $2100
1910.132 D02
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment had been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation had been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment: a) Simpson, PA Facility: The employer had not prepared a workplace hazard assessment for employees exposed to injury from grinding operations, on or about June 28, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.132 F01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.132(f)(1): The employer did not provide training to each employee who is required by this section to use personal protective equipment (PPE): a) Simpson, PA Facility: Employees required to wear safety glasses, hearing protection, and protective welding gear have not been trained in the proper use, care, and maintenance of the protective equipment, on or about August 22, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.147 C01
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.147(c)(1): Energy control program. The employer has not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment was isolated from the energy source and rendered inoperative: a) Simpson, PA Facility: The employer has not established an energy control program consisting of energy control procedures and employee training for a maintenance technician who performed servicing and maintenance on various equipment including cranes and a compressor, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $3500
1910.178 Q01
- Issued
- Abate by
- Penalty
- Initial $2100.00 · Current $1530.00 Reduced
General-duty citation text
29 CFR 1910.178(q)(1): Power-operated industrial trucks not in safe operating condition was not removed from service: a) Simpson, PA Facility: The Caterpillar Towmotor forklift , which had a cracked windshield, inoperable windshield wipers, loose electrical wires, an inoperable audible signalling device (horn), and oil leaking from the exhaust, was not removed from service, on or about May 29, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1530
- — Z (S) $2100
1910.178 L01 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Simpson, PA Facility: The employer did not ensure that four employees who operate the company's two forklifts received training and evaluation, on or about May 28, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.178 P03
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.178(p)(3): Spillage of oil or fuel was not carefully washed away or completely evaporated and the fuel tank cap replaced before restarting engine: a) Warehouse Area: The Caterpillar Towmotor forklift was operated with engine oil leaking down the side of the machine just below the exhaust system exposing the operator to a fire hazard, on or about May 29, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined daily before being placed in service: a) Simpson, PA Facility: The employer did not ensure that each of the forklifts operated by employees were subject to an inspection prior to being placed into service, on or about August 14, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.184 C09
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $2550.00 Reduced
General-duty citation text
29 CFR 1910.184(c)(9): All employees were not kept clear of loads about to be lifted and of suspended loads: a) Big Bay: An employee was exposed to a crushing hazard while painting a heat exchanger weighing approximately 18,000 pounds that was suspended below a crane, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2550
- — Z (S) $3500
1910.179 N03 X
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.179(n)(3)(x): The employer did not insure that the operator does not leave his position at the controls while the load is suspended: a) Big Bay: The employer did not ensure that an employee who was painting a load suspended below a crane remained at the crane controls while the load was suspended, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.184 D
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $2550.00 Reduced
General-duty citation text
29 CFR 1910.184(d): Damaged or defective slings were not immediately removed from service: a) Production Area: Damaged cable slings were not immediately removed from service exposing workers to the potential for being struck by a falling load in the event of a sling failure, on or about July 18, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2550
- — Z (S) $3500
1910.184 F05 III
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.184(f)(5)(iii): Wire-rope slings with kinking, crushing, bird caging or any other damage resulting in distortion of the wire rope structure were not immediately removed from service: a) Big Bay: Wire-rope slings with kinking and broken wires were not immediately removed from service, on or about July 18, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.184 F01
- Issued
- Abate by
- Penalty
- Initial $2100.00 · Current $1530.00 Reduced
General-duty citation text
29 CFR 1910.184(f)(1): The employer used wire-rope slings that did not have permanently affixed and legible identification markings as prescribed by the manufacturer, and that indicate the recommended safe working load for the type(s) of hitch(s) used, the angle upon which it is based, and the number of legs if more than one: a) Production Area: The employer did not ensure that wire-rope slings used by employees had permanently affixed tags that included the required information. This could lead to improper rigging and expose the employees to the potential for sling failure, on or about July 18, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1530
- — Z (S) $2100
1910.212 A02
- Issued
- Penalty
- Initial $2800.00 · Current $2040.00 Reduced
General-duty citation text
29 CFR 1910.212(a)(2): Guards were not affixed to the machine: a) Bird House: The guards over the rotating parts of the deburring machine were not securely attached to the work bench exposing workers to potential contact with rotating parts, on or about May 28, 2014. CORRECTED DURING INSPECTION CERTIFICATION NOT REQUIRED
Recent events (2)
- — I (S) $2040
- — Z (S) $2800
1910.215 A04
- Issued
- Abate by
- Penalty
- Initial $2100.00 · Current $1530.00 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rests were not adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage: a) Machine shop: Both work rests on the machine shop bench grinder were adjusted such that the space between the work rest and the wheel was greater than 1/8 inch exposing the wheel to the potential for damage and employees to being struck by wheel fragments, on or about May 29, 2014. b) Tool Room: The work rest on the left side of the bench grinder in the tool room was adjusted such that the space between the work rest and the wheel was greater than 1/8 inch exposing the wheel to the potential for damage and employees to being struck by wheel fragments, on or about May 29 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $1530
- — Z (S) $2100
1910.215 B09
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: a) Machine Shop: Both tongue guards on the bench grinder in the machine shop were adjusted such that the distance between the guard and the abrasive wheel exceeded one-fourth inch exposing the operator to being struck by flying debris, on or about May 29, 2014. b) Tool Room: The tongue guard on the left side of the bench grinder in the tool room was adjusted such that the distance between the guard and the abrasive wheel exceeded one-forth inch exposing the operator to being struck by flying debris, on or about May 29, 2014. c) Fabrication Area: The tongue guards on both sides of the Cincinnati bench grinder were adjusted such that the distance between the guard and the abrasive wheel exceeded one-forth inch exposing the operator to being struck by flying debris, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (S) $0
1910.219 C02 I
- Issued
- Abate by
- Penalty
- Initial $2800.00 · Current $2040.00 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, were not protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires: a) Webb Rolls: The horizontal shaft that connects the drive motor to the machine was not enclosed by a guard exposing workers to an entanglement hazard, on or about June 24, 2014. b) DC Generator- The horizontal shaft that connects the drive motor to the DC generator was not enclosed by a guard exposing workers to an entanglement hazard, on or about July 1, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2040
- — Z (S) $2800
1910.219 C04 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(c)(4)(i): Projecting shaft ends that projected more than one-half the diameter of the shaft was not guarded by nonrotating caps or safety sleeves: a) Fabrication Area: A projecting shaft end on positioner 4TP was not guarded exposing workers to an entanglement hazard, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 H01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(h)(1): All projecting keys, setscrews, and other projections in revolving parts were not removed or made flush or guarded by metal cover: a) Fabrication Area: A projecting shaft end on 2-axis positioner 4TP was equipped with a protruding bolt that had not been covered or otherwise made safe exposing the operator and others to an entanglement hazard, on or about June 24, 2014. ABATEMENT CERTIFICATION AREA
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 D01
- Issued
- Abate by
- Penalty
- Initial $2800.00 · Current $2040.00 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulleys, with parts of which were seven (7) feet or less from the floor or working platform, were not guarded in accordance with the standards specified in paragraphs (m) and (o) of this section: a) Fabrication Area: The belt driven pulleys on the Wysong rolls were not completely enclosed by a guard exposing the operator and others to an in-running nip point hazard, on or about June 24, 2014. b) Fabrication Area: Belt driven pulleys on the two-axis positioner table 4TP were not fully enclosed by a guard exposing the operator to an in-running nip point hazard, on or about June 24, 2014. c) Big Bay: A set of belt driven pulleys on the end of the sub-arc welder work table were not fully enclosed by a guard exposing the operator and others to an in-running nip point hazard, on or about June 24, 2014. e) Big Bay: Belt driven pulleys on the two-axis positioner table adjacent to the strip cladder were not fully enclosed by a guard exposing the operator to an in-running nip point hazard, on or about June 24, 2014. f) Big Bay: The belt driven pulleys on the Webb rolls were not enclosed by a guard exposing the operator and others to an in-running nip point hazard, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2040
- — Z (S) $2800
1910.219 E03 I
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.219(e)(3)(i): Vertical and inclined belts were not enclosed by a guard conforming to standards in paragraphs (m) and (o) of this section: a) Fabrication Area: The drive belt on the Wysong rolls was not completely enclosed by a guard exposing the operator and others to an abrasion hazard, on or about June 24, 2014. b) Fabrication Area: Drive belts on the two-axis positioner table #4TP were not fully enclosed by a guard exposing the operator to an abrasion hazard, on or about June 24, 2014. c) Big Bay: A drive belt on the end of the sub-arc welder work table was not fully enclosed by a guard exposing the operator and others to an abrasion hazard, on or about June 24, 2014. e) Big Bay: The drive belt on the two-axis positioner table adjacent to the strip cladder were not fully enclosed by a guard exposing the operator to an abrasion hazard, on or about June 24, 2014. f) Big Bay: The drive belt on the Webb rolls were not enclosed by a guard exposing the operator and others to an abrasion hazard, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.219 F01 I
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $2550.00 Reduced
General-duty citation text
29 CFR 1910.219(f)(1)(i): Gears were not guarded by a complete enclosure: a) Big Bay: Drive gears on the Webb steel plate rolling machine were not enclosed by a guard exposing the operator to an amputation hazard, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $2550
- — Z (S) $3500
1910.242 B
- Issued
- Abate by
- Penalty
- Initial $2100.00 · Current $1530.00 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air was used for cleaning purposes and was not reduced to less than 30 psi: a) Bird House: A compressed air blow gun with the valve trigger taped in the open position was used with a pressure of 90 to 100 psi to clean metal chips from a chop saw, on or about May 29, 2014. b) Machine Shop: A compressed air blow gun in the machine shop was used with a pressure of approximately 80 psi for blowing metal chips from a lathe, on or about May 29, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1530
- — Z (S) $2100
1910.252 B03
- Issued
- Abate by
- Penalty
- Initial $2100.00 · Current $1530.00 Reduced
General-duty citation text
29 CFR 1910.252(b)(3): Employees exposed to the hazards created by welding, cutting, or brazing operations were not protected by personal protective equipment in accordance with the requirements of 1910.132: a) Fabrication Area: Employees performing welding operations are not protected from burn injuries by use of protective clothing, on or about May 29, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $1530
- — Z (S) $2100
1910.253 B04 I
- Issued
- Abate by
- Penalty
- Initial $3500.00 · Current $0.00 Reduced
General-duty citation text
29 CFR 1910.253(b)(4)(i): Oxygen cylinders were stored near highly combustible material, especially oil and grease; or near reserve stocks of carbide and acetylene or other fuel-gas cylinders, or near other substance likely to cause or accelerate fire: a) Fabrication Area: A cylinder containing compressed oxygen was stored with a cylinder of MAPP propane fuel-gas exposing workers to a fire hazard, on or about June 24, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (S) $0
- — Z (S) $3500
1910.36 D01
- Issued
- Abate by
- Penalty
- Initial $5600.00 · Current $4500.00 Reduced
General-duty citation text
29 CFR 1910.36(d)(1): Employees were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: a) Old Men's Room: An exit door equipped with a sliding bolt and locking door knob that required special knowledge to open prevented immediate use in an emergency, on or about May 29, 2014 ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED Doyle & Roth Manufacturing Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.36(d)(1), which was contained in OSHA inspection number 923751, citation number 1, item number 1 and was affirmed as a final order on 8/22/2013, with respect to a workplace located at 1 Morse Ave, Simpson, PA.
Recent events (2)
- — I (R) $4500
- — Z (R) $5600
1910.184 I09 III
- Issued
- Abate by
- Penalty
- Initial $4200.00 · Current $3500.00 Reduced
General-duty citation text
29 CFR 1910.184(i)(9)(iii): Synthetic web slings with snags, punctures, tears or cuts were not immediately removed from service: a) Production Area: Synthetic web slings with snags, tears, and punctures were used for hoisting material with a crane exposing workers to a struck-by hazard, on or about July 18, 2014. ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED Doyle & Roth Manufacturing Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.184(i)(9)(iii), which was contained in OSHA inspection number 816841, citation number 1, item number 2b and was affirmed as a final order on 3/18/2013, with respect to a workplace located at 1 Morse Avenue, Simpson, PA.
Recent events (2)
- — I (R) $3500
- — Z (R) $4200
1910.252 B02 III
- Issued
- Abate by
- Penalty
- Initial $5600.00 · Current $4500.00 Reduced
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Welders were not enclosed in an individual booth painted with a finish of low reflectivity such as zinc oxide (an important factor for absorbing ultraviolet radiations) and lamp black, or enclosed with noncombustible screens similarly painted: a) Fabrication Area: The foreman and other workers in the welding area were not protected from arc welding rays due to lack of use of screens or shields by welders, on or about May 29, 2014. ABATEMENT CERTIFICATION AND DOCUMENTATION REQUIRED Doyle & Roth Manufacturing Company, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.252(b)(2)(iii), which was contained in OSHA inspection number 814457843, citation number 1, item number 3, and was affirmed as a final order on 10/18/2010, with respect to a workplace located at 1 Morse Avenue, Simpson, PA.
Recent events (2)
- — I (R) $4500
- — Z (R) $5600
1910.303 G01
- Issued
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment to permit ready and safe operation and maintenance of such equipment: a) Big Bay: A pair of welding units installed in front of several panel boxes did not provide adequate space to permit ready access and safe operation, on or about June 24, 2014. CORRECTED DURING INSPECTION CERTIFICATION NOT REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H01
- Issued
- Abate by
- Penalty
- Initial $0.00 · Current $0.00
General-duty citation text
29 CFR 1910.1200(h)(1): Employers did not provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new physical or health hazard the employees have not previously been trained about is introduced into their work area: a) Simpson, PA Facility: Employees routinely exposed to hazardous substances have not received training on the new format of the safety data sheets and hazard labeling, on or about May 28, 2014. ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at DOYLE & ROTH MANUFACTURING COMPANY, INC.
SIMPSON, PA—2023-09-07 00:00:00
DOYLE & ROTH MANUFACTURING COMPANY, INC.
SIMPSON, PA—2014-06-05 00:00:00
DOYLE & ROTH MANUFACTURING COMPANY, INC.
SIMPSON, PA—2010-08-05 00:00:00
DOYLE & ROTH MANUFACTURING COMPANY INC
View DOYLE & ROTH MANUFACTURING COMPANY, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332410)
ORANGEBURG, SC—2026-07-01
77560 - FLEXTRONICS
LEXINGTON, VA—2026-05-04
MODINE MANUFACTURING COMPANY
HICKORY, NC—2026-03-18
160746 - MAXIMIZER SYSTEMS, INC.
DELAWARE, OH—2026-02-17
ONDA USA LLC
FRANKLIN, PA—2026-02-11
WM. T. SPAEDER COMPANY
More inspections in PA
MILTON, PA—2026-07-10
HOMETOWN FOODS CHEF BOYARDEE CO.
SUNBURY, PA—2026-07-10
DEMPSEY UNIFORM & LINEN SUPPLY, INC
LANDISVILLE, PA—2026-07-10
FAIRVIEW DEMOLITION LLC
YORK, PA—2026-07-10
AMERICAN SPECIALTY SYSTEMS INC.
WILLIAMSPORT, PA—2026-07-10
INTERNATIONAL PAINT PROS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339786451.