Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: DEAN WEICKART

Planned inspection · Health discipline

On , OSHA opened a planned health inspection of DEAN WEICKART in 790 LEE ST., DES PLAINES, IL 60016 (NAICS 238150). OSHA activity number 339787814.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Dean Weickart for free Get an email when a new federal OSHA severe-injury report for Dean Weickart is published. One employer, no account, unsubscribe in one click.
Establishment
DEAN WEICKART
Site address
790 LEE ST.
City
DES PLAINES
State
IL
ZIP
60016
Mailing
417 PARK ST., BENSENVILLE, IL 60106
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238150
Employees
3
Ownership type
Private (A)

3 citations on file for this inspection.

1910.1200 E01

Other-than-serious 1 instance 1 exposed
Issued
Aug 12, 2014
Abate by
Sep 29, 2014
Penalty
Initial $1,600 · Current $1,600

Hazardous substances S103

Construction Reference: 1926.59 NOTE: The requirements applicable to construction work under this section are identical to those set forth at � 1910.1200 of this chapter.    29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which described how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) would be met:    a) The employer did not develop or implement a written hazard communication program in accordance with 29 CFR 1910.1200(e)(1) that would describe or include at least the following:  1) Requirement for labeling and other forms of warning;  2) Safety data sheet availability;  3) Employee information and training;  4) A list of hazardous chemicals known to be present in the workplace;   5) Methods to inform employees of the hazards on non-routine tasks; and   6) Methods to provide other employer(s) access to safety data sheet; information on any precautionary measures and the labeling system used in the workplace.    Worker(s) were exposed to hazardous particulates containing crystalline silica while dry grinding mortar joints above a window.
Recent events (3)
  • · A (O) $1600
  • · I (O) $200
  • · Z (S) $1600

1910.1200 H01

Other-than-serious 1 instance 1 exposed
Issued
Aug 12, 2014
Abate by
Sep 29, 2014
Penalty
Initial $0 · Current $0

Hazardous substances S103

Construction Reference: 1926.59  NOTE: The requirements applicable to construction work under this section are identical to those set forth at � 1910.1200 of this chapter.    29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area:    a) The employer did not provide employee(s) with training regarding the health hazards of Crystalline Silica.  Worker(s) were exposed to hazardous particulates containing crystalline silica while dry grinding mortar joints above a window.
Recent events (3)
  • · A (O) $0
  • · I (O) $0
  • · Z (S) $0

1926.102 A02

Other-than-serious 1 instance 1 exposed
Issued
Aug 12, 2014
Penalty
Initial $0 · Current $0

Hazardous substances S103

29 CFR 1926.102(a)(2): Eye and face protection required by this Part did not meet the requirements specified in American National Standards Institute, Z87.1-1968, Practice for Occupational and Educational Eye and Face Protection:  a) The employer did not ensure that worker(s) wore eye protection (i.e. sun glasses) that were ANSI Z87.1 -rated when grinding mortar joints above a window using Ryobi 4.5 inch angle grinder(s).
Recent events (3)
  • · A (O) $0
  • · I (O) $0
  • · Z (O) $0

View Dean Weickart's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339787814.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.