BELLE CHASSE, LA ·
OSHA Inspection: MARCO RODRIGUEZ
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MARCO RODRIGUEZ in 333 F. EDWARD HEBERT BLVD., BELLE CHASSE, LA 70037 (NAICS 238320). OSHA activity number 339791626.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARCO RODRIGUEZ
- Site address
- 333 F. EDWARD HEBERT BLVD.
- City
- BELLE CHASSE
- State
- LA
- ZIP
- 70037
- Mailing
- 305 N. HULLEN ST. APT. B, METAIRIE, LA 70001
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238320
- Employees
- 20
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1926.404 F06
- Issued
- Jul 22, 2014
- Penalty
- Initial $1,360 · Current $1,360
General-duty citation text
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: On or about May 22, 2014; in the north building, the employer allowed employees to utilize an electrical extension cord (missing ground pin) and a portable light fixture (missing ground pin) that did not have permanent and continuous path to ground. Employees used the electrical extension cord and light in order to illuminate a room and hallway that they were painting. a) Center room, portable light fixture not grounded (missing ground pin) b) East hall, electrical extension cord not grounded (missing ground pin)
Recent events (1)
- · Z (S) $1360
1926.405 G02 III
- Issued
- Jul 22, 2014
- Penalty
- Initial $1,020 · Current $1,020
General-duty citation text
29 CFR 1926.405(g)(2)(iii): Flexible cords were not used in continuous lengths without splice or tap: On or about May 22, 2014; in the north building, the employer allowed employees to utilize an electrical extension cord that was spliced into a larger diameter (lower gauge) electrical extension cord. Employees used the electrical extension cord to energize a portable light fixture in order to illuminate a room that they were painting.
Recent events (1)
- · Z (S) $1020
1926.405 G02 IV
- Issued
- Jul 22, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: On or about May 22, 2014; in the north building, the employer allowed employees to utilize two (2) electrical extension cords with inadequate strain relief and a portable light fixture with inadequate strain relief. Employees used the electrical extension cords to energize lights in order to illuminate a room and hallway that they were painting. a) Center room, inadequate strain relief on extension cord b) Center room, inadequate strain relief on portable light fixture c) East hall, inadequate strain relief on extension cord
Recent events (1)
- · Z (O) $0
More inspections at Marco Rodriguez
View Marco Rodriguez's full OSHA safety record →
More inspections in this industry (NAICS 238320)
More inspections in LA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339791626.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.