CLEVELAND, OH —
OSHA Inspection: ALCON INDUSTRIES
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ALCON INDUSTRIES in 7990 BAKER AVE., CLEVELAND, OH 44102 (NAICS 331513). OSHA activity number 339791923.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ALCON INDUSTRIES
- Site address
- 7990 BAKER AVE.
- City
- CLEVELAND
- State
- OH
- ZIP
- 44102
- Mailing
- 7990 BAKER AVE., CLEVELAND, OH 44102
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331513
- Employees
- 65
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C05 II B
- Issued
- Aug 4, 2014
- Abate by
- Aug 28, 2014
- Penalty
- Initial $3,500 · Current $0 Reduced
General-duty citation text
29 CFR 1910.147(c)(5)(ii)(B): Lockout and tagout devices were not standardized within the facility in at least one of the following criteria: color; shape; or size: On or about June 3, 2014, the employer did not ensure lockout and/or tagout devices were standardized within the facility.
Recent events (2)
- — I (O) $0
- — Z (S) $3500
1910.147 C05 II D
- Issued
- Aug 4, 2014
- Abate by
- Aug 28, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(ii)(D): Lockout devices and tagout devices did not indicate the identity of the employee applying the device(s): On or about June 3, 2014, the employer did not ensure lockout and/or tagout devices indicated the identity of the employee applying the devices.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.147 C06 I
- Issued
- Aug 4, 2014
- Abate by
- Aug 28, 2014
- Penalty
- Initial $3,500 · Current $2,620 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: On or about June 3, 2014, the employer did not conduct periodic inspections of the energy control procedures at least annually to ensure the procedure and requirements of 1910.147 were being followed. Equipment includes, but is not limited to, presses, saws, conveyers, furnaces, exhaust fans, etc. Hazardous energy sources includes, but is not limited to, electrical, pneumatic, thermal, hydraulic, and natural gas power.
Recent events (2)
- — I (S) $2620
- — Z (S) $3500
1910.147 C07 IV
- Issued
- Aug 4, 2014
- Abate by
- Aug 28, 2014
- Penalty
- Initial $3,500 · Current $2,620 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(iv): The employer did not certified that employee training had been accomplished: On or about June 3, 2014, the employer did not certify affected and authorized employee energy control procedure training.
Recent events (2)
- — I (S) $2620
- — Z (S) $3500
1910.147 D02
- Issued
- Aug 4, 2014
- Abate by
- Aug 8, 2014
- Penalty
- Initial $4,900 · Current $4,000 Reduced
General-duty citation text
29 CFR 1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment: On or about June 3, 2014, the employer did not ensure the Power-Track 500-10 electric furnace, known as the 500 furnace, was shut down using established procedures for the equipment
Recent events (2)
- — I (S) $4000
- — Z (S) $4900
1910.147 D04 I
- Issued
- Aug 4, 2014
- Abate by
- Aug 8, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(4)(i): Lockout or tagout devices were not affixed to each energy isolating device by authorized employees: On or about June 3, 2014, the employer did not ensure lockout devices were affixed to the electrical energy isolation device of the Power-Track 500-10 electric furnace, known as the 500 furnace.
Recent events (2)
- — I (S) $0
- — Z (S) $0
More inspections at Alcon Industries
View Alcon Industries's full OSHA safety record →
More inspections in this industry (NAICS 331513)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339791923.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.