Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,193,745Inspections Most recent open 2026-08-06 Last loaded 2026-08-10

OSHA Inspection: CENTRIFUGAL CASTINGS, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of CENTRIFUGAL CASTINGS, INC. in 3320 PARKWAY DRIVE, TEMPLE, TX 76503 (NAICS 331513). OSHA activity number 339793846.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Centrifugal Castings, INC. for free Get an email when a new federal OSHA severe-injury report for Centrifugal Castings, INC. is published. One employer, no account, unsubscribe in one click.
Site address
3320 PARKWAY DRIVE
City
TEMPLE
State
TX
ZIP
76503
Mailing
P.O. BOX 210, TEMPLE, TX 76503
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
331513
Employees
60
Ownership type
A

4 citations on file for this inspection.

1910.106 E02 IV D

Serious Gravity 5 1 instance 60 exposed
Issued
Aug 25, 2014
Abate by
Aug 29, 2014
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1910.106(e)(2)(iv)(d): Flammable liquids were not drawn from or transferred into vessels, containers, or portable tanks within a building only through a closed piping system, from safety cans, by means of a device drawing through the top, or from a container or portable tanks by gravity through an approved self-closing valve.    On or about 3 June 2014, and at times prior thereto, employees would use the ball valve on a 55 gallon drum dispenser of Mineral Spirit 300 to fill smaller containers without the use of a self-closing valve, exposing the employees to a fire and explosion hazard.
Recent events (2)
  • · I (S) $1400
  • · Z (S) $2800

1910.132 A

Serious Gravity 5 3 instances 5 exposed
Issued
Aug 25, 2014
Abate by
Dec 19, 2014
Penalty
Initial $3,500 · Current $1,750 Reduced
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered.    On or about 3 June 2014, and at times prior thereto, employees performing melting activities were wearing FR clothing arc rated at 8.7 for shirts and 23.8 for pants, exposing those employees to a burn hazard from splashing or popping of molten metal onto their clothing.
Recent events (2)
  • · I (S) $1750
  • · Z (S) $3500

1910.133 A01

Serious Gravity 5 3 instances 5 exposed
Issued
Aug 25, 2014
Abate by
Aug 29, 2014
Penalty
Initial $3,500 · Current $1,750 Reduced
29 CFR 1910.133(a)(1): Protective face equipment was not required where there was a reasonable probability of injury that could be prevented by such equipment.    On or about 3 June 2014, and at times prior thereto, two employees were working on a melting pot each in which at certain times, flux has to be added that may have rust on it, causing sparks to fly out during the melting process. During these times, the employees are wearing safety glasses but not a face shield or hard hats, exposing the workers to burns from being struck about the face and neck by hot sparks of molten metal.
Recent events (2)
  • · I (S) $1750
  • · Z (S) $3500

1910.135 A01

Serious Gravity 5 3 instances 5 exposed
Issued
Aug 25, 2014
Abate by
Aug 29, 2014
Penalty
Initial $0 · Current $0
29 CFR 1910.135(a)(1): The employer did not ensure that each affected employee wear a protective helmet when working in areas where there is a potential for injury to the head from falling objects.  On or about 3 June 2014, and at times prior thereto, two employees were working on a melting pot each in which at certain times, flux has to be added that may have rust on it, causing sparks to fly out during the melting process. During these times, the employees are wearing safety glasses but not face shields and hard hats, exposing the workers to burns on the head from being struck by hot sparks of molten metal.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

View Centrifugal Castings, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339793846.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.