CHICAGO, IL —
OSHA Inspection: BALLIN'S MASONRY AND CONSTRUCTION INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of BALLIN'S MASONRY AND CONSTRUCTION INC. in 2613 S. HALSTED ST., CHICAGO, IL 60614 (NAICS 238140). OSHA activity number 339800328.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BALLIN'S MASONRY AND CONSTRUCTION INC.
- Site address
- 2613 S. HALSTED ST.
- City
- CHICAGO
- State
- IL
- ZIP
- 60614
- Mailing
- 617 ELMWOOD AVE., JOLIET, IL 60433
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238140
- Employees
- 5
- Ownership type
- A
Citations
7 citations on file for this inspection.
1903.19 C01
- Issued
- Jun 17, 2015
- Abate by
- Aug 4, 2015
- Penalty
- Initial $400 · Current $400
General-duty citation text
29 CFR 1903.19(c)(1): Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section. a. On or about June 17, 2015 - the employer did not certify to OSHA within 10 days after the abatement date that each of the following cited violations issued had been corrected: Citation Number Item Number Abatement Date 01 001 08/21/2014 01 002a 08/21/2014 01 002b 08/01/2014 01 004 08/01/2014
Recent events (1)
- — Z (O) $400
1910.178 L01 I
- Issued
- Jul 28, 2014
- Abate by
- Aug 21, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer shall ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a. On or about June 05, 2014, at the above addressed jobsite, an employee was operating a powered industrial vehicle (Gradall 544B) during material handling operations. The employer did not ensure that each powered industrial truck operator completed the required training and evaluation specified in paragraph (l).
Recent events (2)
- — I (S) $2800
- — Z (S) $2800
1926.20 B01
- Issued
- Jul 28, 2014
- Abate by
- Aug 21, 2014
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.20(b)(1): It shall be the responsibility of the employer to initiate and maintain such programs as may be necessary to comply with this part: a. On or about June 05, 2013, at the above addressed jobsite, the employer did not maintain an accident prevention program to comply with the regulations of this part which included, but were not limited to employee protection when exposed to fall hazards.
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
1926.20 B02
- Issued
- Jul 28, 2014
- Abate by
- Aug 1, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.20(b)(2): Such programs shall provide for frequent and regular inspections of the job sites, materials, and equipment to be made by competent persons designated by the employers. a. On or about June 05, 2014, at the above addressed jobsite, an inspection was not conducted by a competent person capable of correcting hazards such as falls, which could result in employee injuries.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1926.451 G01
- Issued
- Jul 28, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level shall be protected from falling to that lower level. Paragraphs (g)(1)(i) through (vii) of this section establish the types of fall protection to be provided to the employees on each type of scaffold: a. On or about June 05, 2014, at the above addressed jobsite, an employee performing bricklaying operations from a pallet on the forks of a powered industrial vehicle (Gradall 544B), approximately twenty-three (23) feet seven (7) inches above the ground, was exposed to injuries from falls due to the lack of guardrails.
Recent events (2)
- — I (S) $2800
- — Z (S) $2800
1926.501 B01
- Issued
- Jul 28, 2014
- Abate by
- Aug 1, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: a. On or about June 05, 2014, at the above addressed jobsite, employees performing bricklaying operations were exposed to falls, approximately twenty-three (23) feet seven (7) inches above the ground, created by the presence of unprotected sides.
Recent events (2)
- — I (S) $2800
- — Z (S) $2800
1926.701 B
- Issued
- Jul 28, 2014
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.701(b): Reinforcing steel. All protruding reinforcing steel, onto and into which employees could fall, shall be guarded to eliminate the hazard of impalement: a. On or about June 05, 2014, at the above addressed jobsite, employees working on the ground level entry way were exposed to ends of rebar that were not guarded, thereby exposing employees to the hazards associated with impalement.
Recent events (2)
- — I (S) $2000
- — Z (S) $2000
More inspections in this industry (NAICS 238140)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339800328.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.