SAND SPRINGS, OK ·
OSHA Inspection: D & V MANUFACTURING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of D & V MANUFACTURING, INC. in 105 WELLSTON PARK RD., SAND SPRINGS, OK 74063 (NAICS 333249). OSHA activity number 339804668.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- D & V MANUFACTURING, INC.
- Site address
- 105 WELLSTON PARK RD.
- City
- SAND SPRINGS
- State
- OK
- ZIP
- 74063
- Mailing
- P.O. BOX 6 105 WELLSTON PARK RD., SAND SPRINGS, OK 74063
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333249
- Employees
- 11
- Ownership type
- Private (A)
Citations
5 citations on file for this inspection.
1910.212 A03 II
- Issued
- Jul 18, 2014
- Abate by
- Sep 2, 2014
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle. On or about June 10, 2014 and at times prior to employees working in the machine shop area were exposed to lacerations and amputation hazards with use of Startrite V500H vertical band saw without guarding on unused portion of the blade.
Recent events (2)
- · I (S) $800
- · Z (S) $1600
1910.242 B
- Issued
- Jul 18, 2014
- Abate by
- Sep 2, 2014
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i. pressure On or before June 10, 2014 and at times prior to employees working in shop area were exposed to struck by hazards when using compressed air hose lines with hand wand nozzles that did not reduce the pressure to less than 30 p.s.i. to clean equipment and parts. 1) Hand nozzle in front part of shop near PUMA 400 LATHE 2) Hand nozzle in back part of shop near HOSS VF3 MILL
Recent events (2)
- · I (S) $800
- · Z (S) $1600
1904.29 B01
- Issued
- Jul 18, 2014
- Abate by
- Sep 2, 2014
- Penalty
- Initial $400 · Current $200 Reduced
General-duty citation text
29 CFR 1904.29(b)(1): 29 CFR 1904.29(b)(1): A Log of all recordable work-related injuries and illnesses (OSHA Form 300 or equivalent), was not completed in the detail as required by the regulation. On or about June 10, 2014 and at times prior to the employees did not have access to complete accident and injury logs, and illnesses as required on the OSHA Form 300, nor did the employer complete the annual summary on the OSHA Form 300A and post it for employee review.
Recent events (2)
- · I (O) $200
- · Z (O) $400
1910.303 G01 I B
- Issued
- Jul 18, 2014
- Abate by
- Sep 2, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(i)(B): For electric equipment operating at 600 volts, nominal, or less to ground, and likely to require examination, adjustment, servicing, or maintenance while energized, the width of the working space in front of electrical equipment was less than the width of the equipment or 762 mm (30 inches), whichever was greater : On or before June 10, 2014 and at times prior to employees in the shop area were exposed to fire and electrical hazards when chemicals were stored in front of the main control panel and emergency shut off.
Recent events (2)
- · I (O) $0
- · Z (O) $0
1910.1200 G08
- Issued
- Jul 18, 2014
- Abate by
- Sep 2, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(g)(8): The employer did not ensure that material safety data sheets were readily accessible to the employees in their work area during each work shift: On or about June 10, 2014 and at times prior to employees working in the shop areas were not afforded access to safety data sheets for chemicals used, including but not limited to coolants, oils, and solvents exposing employees to hazards from chemical contact.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at D & V Manufacturing, INC.
View D & V Manufacturing, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333249)
More inspections in OK
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339804668.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.