TOLEDO, OH —
OSHA Inspection: THE ELECTRO PRIME GROUP, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of THE ELECTRO PRIME GROUP, LLC in 4510 LINT AVENUE, TOLEDO, OH 43612 (NAICS 332812). OSHA activity number 339806457.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- THE ELECTRO PRIME GROUP, LLC
- Site address
- 4510 LINT AVENUE
- City
- TOLEDO
- State
- OH
- ZIP
- 43612
- Mailing
- 4510 LINT AVENUE, TOLEDO, OH 43612
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332812
- Employees
- 58
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.147 C04 I
- Issued
- Nov 5, 2014
- Abate by
- Dec 23, 2014
- Penalty
- Initial $7,000 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a.) The Electro Prime Group, LLC located at 4510 Lint Avenue Toledo, OH 43612; On or about June 13, 2014, the employer did not assure employees were protected while performing maintenance activities on the Right Fender Line in Zone 3. Employees are required to change dies on the Fanuc Robot and lockout procedures were not documented or utilized, exposing them to struck by hazards from the Fanuc Robot as well as other robots in the cell.
Recent events (2)
- — I (S) $3500
- — Z (S) $7000
1910.147 D02
- Issued
- Nov 5, 2014
- Abate by
- Dec 23, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(d)(2): The machine or equipment was not turned off or shut down using the procedures established for the machine or equipment: a.) The Electro Prime Group, LLC located at 4510 Lint Avenue Toledo, OH 43612; On or about June 13, 2014, the employer did not assure employees properly deenergized the Fanuc Robot while performing maintenance activities on the Right Fender Line in Zone 3, exposing them to struck by hazards from the Fanuc Robot and other robots in the cell.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.212 A01
- Issued
- Nov 5, 2014
- Abate by
- Dec 2, 2014
- Penalty
- Initial $7,000 · Current $3,500 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a.) The Electro Prime Group, LLC located at 4510 Lint Ave. Toledo, OH; On or about June 13, 2014, the employer did not assure employees were adequately protected while working on the right fender line. Employees are required to remove finished fenders off of a conveyor, and are exposed to struck by hazards from robots. b.) The Electro Prime Group, LLC located at 4510 Lint Ave. Toledo, OH; On or about June 13, 2014, the employer did not assure employees were adequately protected while working on the left fender line. Employees are required to remove finished fenders off of a conveyor, and are exposed to struck by hazards from robots.
Recent events (2)
- — I (S) $3500
- — Z (S) $7000
1910.212 A03 II
- Issued
- Nov 5, 2014
- Abate by
- Dec 2, 2014
- Penalty
- Initial $5,500 · Current $2,750 Reduced
General-duty citation text
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a.) The Electro Prime Group, LLC located at 4510 Lint Ave. Toledo, OH 43612; On or about June 13, 2014, the employer did not assure employees were protected while operating the clinch nut machines. Employees are exposed to crush hazards when operating the clinch nut machines due to inadequate guarding.
Recent events (2)
- — I (S) $2750
- — Z (S) $5500
More inspections at The Electro Prime Group, LLC
View The Electro Prime Group, LLC's full OSHA safety record →
More inspections in this industry (NAICS 332812)
More inspections in OH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339806457.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.