AMERICAN FALLS, ID —
OSHA Inspection: AGSPRING IDAHO LLC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of AGSPRING IDAHO LLC. in 440 N. OREGON TRAIL, AMERICAN FALLS, ID 83211 (NAICS 424510). OSHA activity number 339819757.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- AGSPRING IDAHO LLC.
- Site address
- 440 N. OREGON TRAIL
- City
- AMERICAN FALLS
- State
- ID
- ZIP
- 83211
- Mailing
- P.O. BOX 59, AMERICAN FALLS, ID 83211
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 424510
- Employees
- 11
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.212 A01
- Issued
- Oct 1, 2014
- Abate by
- Oct 28, 2014
- Penalty
- Initial $2,975 · Current $2,975
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Grain bin #6: On or about 6-12-2014, bin auger missing part of the guard at the bottom of the auger in the section just above where it goes below grade. Note: Abatement certification is required for this item.
Recent events (1)
- — Z (S) $2975
1910.272 J02 II
- Issued
- Oct 1, 2014
- Abate by
- Oct 28, 2014
- Penalty
- Initial $2,380 · Current $2,380
General-duty citation text
29 CFR 1910.272(j)(2)(ii): The employer did not immediately remove any fugitive grain dust accumulations whenever the exceeded 1/8 inch at priority housekeeping areas, pursuant to the housekeeping program for grain elevators: a) Grain Elevator B-2 main elevator leg in truck receiving pit area and nearby conveyor belt: On or about 6-12-2014, fugitive grain dust of approximately 3/8" average depth had been allowed to accumulate and was not immediately removed. Note: Abatement certification is required for this item.
Recent events (1)
- — Z (S) $2380
1910.272 K
- Issued
- Oct 1, 2014
- Abate by
- Oct 28, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.272(k): Receiving pit feed openings in the grain handling facility, such as truck or railcar receiving pits, were not covered by grates which had a maximum opening width of 2 1/ 2 inches: a) Grain Elevator B-2: On or about 6-12-2014, truck receiving pit had several damaged sections in the grate opening that were approximately 2 3/4" and greater between bars. Note: Abatement certification is required for this item.
Recent events (1)
- — Z (O) $0
More inspections at Agspring Idaho LLC.
View Agspring Idaho LLC.'s full OSHA safety record →
More inspections in this industry (NAICS 424510)
More inspections in ID
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339819757.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.