LAKEWOOD, NJ —
OSHA Inspection: J. KNIPPER & COMPANY INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of J. KNIPPER & COMPANY INC. in ONE HEALTHCARE WAY, LAKEWOOD, NJ 08701 (NAICS 541860). OSHA activity number 339830895.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- J. KNIPPER & COMPANY INC.
- Site address
- ONE HEALTHCARE WAY
- City
- LAKEWOOD
- State
- NJ
- ZIP
- 08701
- Mailing
- ONE HEALTHCARE WAY, LAKEWOOD, NJ 08701
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 541860
- Employees
- 160
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.37 B05
- Issued
- Aug 18, 2014
- Abate by
- Sep 12, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.37(b)(5): Each doorway or passage along an exit access that could be mistaken for an exit was not marked "Not an Exit" or similar designation, or be identified by a sign indicating its actual use (e.g. closet): a) J. Knipper and Co. Inc., Door located at the warehouse to access the maintenance and storage area: the door was not mark "Not and Exit" to identify it. Employees could mistakenly use it as an emergency exit since this door is located along the exit path and/or direction of travel to the nearest exit discharge, observed on or about 6/30/2014.
Recent events (1)
- — Z (O) $0
1910.147 C06 I
- Issued
- Aug 18, 2014
- Abate by
- Sep 12, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) K. Knipper and Co. Inc.: The employer did not conduct periodic inspection on the lockout/tagout procedures for machines such as: MBM Folder model #352, Fast Fold Folder Model #714400, Dalemark imprinter model #975 AT-A, Dalemark imprinter model # 975HR, Titan series 1000 rollbag machine, Titan series 1000P rollbag machine, United power conveyor model # 11, Phillipsburg inserter Model # 7200 S/N 6-30-1615, Beseller L-sealer Model # 1913MB, Shrink tunnel 1012C, occurred on or about 06/30/2014.
Recent events (1)
- — Z (O) $0
1910.303 G01 II
- Issued
- Aug 18, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: a) J. Knipper and Co. Inc., Warehouse area near maintenance/storage door: An electrical panel (photovoltaic system/AC disconnect) was blocked by a self supporting ladder model #T7414, S/N 051751022162, observed on or about 06/30/2014.
Recent events (1)
- — Z (O) $0
More inspections at J. Knipper & Company INC.
View J. Knipper & Company INC.'s full OSHA safety record →
More inspections in this industry (NAICS 541860)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339830895.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.