Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: ARITA CONSTRUCTION

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ARITA CONSTRUCTION in 4020 CYBER AVENUE, COLUMBUS, OH 43213 (NAICS 238130). OSHA activity number 339835548.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Arita Construction — free Get an email when a new federal OSHA severe-injury report for Arita Construction is published. One employer, no account, unsubscribe in one click.
Establishment
ARITA CONSTRUCTION
Site address
4020 CYBER AVENUE
City
COLUMBUS
State
OH
ZIP
43213
Mailing
1983 ARDEN FOREST LANE, COLUMBUS, OH 43223
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238130
Employees
5
Ownership type
A

3 citations on file for this inspection.

1926.404 B01 III C

Serious Gravity 5 2 instances 5 exposed
Issued
Jul 29, 2014
Abate by
Aug 16, 2014
Penalty
Initial $2,000 · Current $600 Reduced
29 CFR 1926.404(b)(1)(iii)(C): Each cord set, attachment cap, plug and receptacle of cord sets, and any equipment connected by cord and plug, except cord sets and receptacles which are fixed and not exposed to damage, shall be visually inspected before each day's use for external defects, such as deformed or missing pins or insulation damage, and for indications of possible internal damage. Equipment found damaged or defective shall not be used until repaired.  a. At the worksite where employees used a blue extension cord with a missing ground prong and damaged outer insulation jacket to provide power to circular saws, the cord had not been inspected before the days use, thereby exposing employees to an electrical contact hazard.  b. At the worksite where employees used an arrange/black extension cord to provide power to circular saws, the cords strain relief was pulled away from the outer insulation jacket on both ends, having a damaged female plug, and damage to the outer insulation jacket, thereby exposing employees to a contact hazard.
Recent events (2)
  • — I (S) $600
  • — Z (S) $2000

1926.404 F06

Serious Gravity 1 1 instance 5 exposed
Issued
Jul 29, 2014
Abate by
Aug 16, 2014
Penalty
Initial $1,200 · Current $360 Reduced
29 CFR 1926.404(f)(6): Grounding path. The path to ground from circuits, equipment, and enclosures shall be permanent and continuous.  a. At the temporary receptacle where employees plugged in an extension cord to provide power to circular saws, the ground prong was missing from the male end of the blue extension cord, thereby exposing employees to an electrical contact hazard.
Recent events (2)
  • — I (S) $360
  • — Z (S) $1200

1926.405 G02 IV

Serious Gravity 5 4 instances 5 exposed
Issued
Jul 29, 2014
Abate by
Aug 16, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.405(g)(2)(iv): Strain relief. Flexible cords shall be connected to devices and fittings so that strain relief is provided which will prevent pull from being directly transmitted to joints or terminal screws.  a. At the worksite where employees used extension cords to provide power to circular saws, the strain relief was pulled away from both the male and female ends of the blue extension cord exposing any tension to the terminals, thereby exposing employees to an electrical contact hazard.  a. At the worksite where employees used extension cords to provide power to circular saws, the strain relief was pulled away from both the male and female ends of the orange/gray extension cord exposing any tension to the terminals, thereby exposing employees to an electrical contact hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Arita Construction's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339835548.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.