LONDONDERRY, NH —
OSHA Inspection: MET L FAB, INC.
Complaint inspection · Health discipline
At a glance
On , OSHA opened a complaint health inspection of MET L FAB, INC. in 53 WENTWORTH AVE., LONDONDERRY, NH 03053 (NAICS 332322). OSHA activity number 339835753.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MET L FAB, INC.
- Site address
- 53 WENTWORTH AVE.
- City
- LONDONDERRY
- State
- NH
- ZIP
- 03053
- Mailing
- 53 WENTWORTH AVE., LONDONDERRY, NH 03053
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332322
- Employees
- 10
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.219 C02 I
- Issued
- Sep 26, 2014
- Abate by
- Oct 31, 2014
- Penalty
- Initial $2,000 · Current $1,000 Reduced
General-duty citation text
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting: a. Grinding Area - The horizontal shafts on the grinding/buffing machines were not guarded.
Recent events (2)
- — I (S) $1000
- — Z (S) $2000
1910.219 C04 I
- Issued
- Sep 26, 2014
- Abate by
- Oct 31, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: a. Grinding Area - The projecting shaft ends on the grinding/buffing machines were not guarded.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.303 B02
- Issued
- Sep 26, 2014
- Abate by
- Oct 31, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(2): Listed or labeled electrical equipment was not used or installed in accordance with instructions included in the listing or labeling: a. Grinding Area - Electrical outlet had missing screws and a metal hook inserted in one of the screw holes, resulting in the equipment being used against the labeling and listing provisions for which it was designed.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H03 IV
- Issued
- Sep 26, 2014
- Abate by
- Oct 31, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(iv): Employees had not been provided with training including an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employees can obtain and use the appropriate hazard information: a. Establishment - The new GHS 2012 training for labeling and SDS had not been provided to employees as required by 12/1/13.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at MET L FAB, INC.
View MET L FAB, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332322)
More inspections in NH
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339835753.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.