OSHA Inspection: SJB SERVICES, INC.

Issued

2014-07-10 00:00:00

Abate by

2014-07-22 00:00:00

Penalty

Initial $1200.00 · Current $720.00 Reduced

General-duty citation text

29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition:   a) On or about 7/3/2014, On the CME Drill Rig:  Hydraulic lines were leaking onto the carrier, which created a slippery walking surface for employees performing maintenance work.   Abatement certification is required for this item.

Issued

2014-07-10 00:00:00

Abate by

2014-07-22 00:00:00

Penalty

Initial $1200.00 · Current $720.00 Reduced

General-duty citation text

29 CFR 1910.157(c)(4): Portable fire extinguishers were not maintained in a fully charged and operable condition:  a) On or about 7/3/2014, On the CME Drill Rig:  The fire extinguisher for the drill rig was damaged in that the handle could not be depressed.    Abatement certification is required for this item.

Issued

2014-07-10 00:00:00

Abate by

2014-07-22 00:00:00

Penalty

Initial $0.00 · Current $0.00

General-duty citation text

29 CFR 1910.157(e)(1): The employer shall be responsible for the inspection, maintenance and testing of all portable fire extinguishers in the workplace:  a) On or about 7/3/2014, On the CME Drill Rig:  The fire extinguisher for the drill rig had not been inspected.    Abatement certification is required for this item.

Issued

2014-07-10 00:00:00

Abate by

2014-07-22 00:00:00

Penalty

Initial $2000.00 · Current $1200.00 Reduced

General-duty citation text

29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:  a) On or about 7/3/2014, On the CME Drill Rig:  The angle drive on the rear of the drill rig was not provided with a barrier guard.     b) On or about 7/3/2014, On the CME Drill Rig:  The drill shaft/ augers were not provided with a barrier guard or trip switches on the rear face of the drill frame.     Abatement certification is required for this item.