Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,645Inspections Most recent open 2026-07-16 Last loaded 2026-07-20

OSHA Inspection: LEDGE ROCK BUILDING & DEVELOPMENT, LLC.

Unprogrammed Related inspection · Safety discipline

On , OSHA opened an unprogrammed Related safety inspection of LEDGE ROCK BUILDING & DEVELOPMENT, LLC. in 111 DYLAN ROAD, BROADALBIN, NY 12025 (NAICS 236115). OSHA activity number 339838393.

Watch Ledge Rock Building & Development, LLC. — free Get an email when a new federal OSHA severe-injury report for Ledge Rock Building & Development, LLC. is published. One employer, no account, unsubscribe in one click.
Site address
111 DYLAN ROAD
City
BROADALBIN
State
NY
ZIP
12025
Mailing
623 MIDLINE ROAD, AMSTERDAM, NY 12010
Inspection type
Unprogrammed Related (G)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
236115
Employees
2
Ownership type
A

4 citations on file for this inspection.

1926.501 B13

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $2800.00 · Current $2800.00
29 CFR 1926.501(b)(13):  Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):   (a)  Second Story Mezzanine - on or about June 14, 2014 - no guardrails were installed to prevent a fall to the first story and the basement floors.  The elevation from the second story mezzanine to the wood first story floor was approximately 10 feet.  The elevation to the concrete basement floor from the second story floor was approximately 18 feet, 8 inches.
Recent events (1)
  • — Z (S) $2800

1926.503 A02 II

Serious Gravity 10 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.503(a)(2)(ii):  The employer did not assure that each employee, as necessary, had been trained by a competent person in the correct procedures for erecting, maintaining, disassembling and inspecting the fall protection systems to be used:  (a)  Jobsite - on or about June 14, 2014 - employees were not trained in the proper procedures for the erection of guardrails that were used as a fall protection system.
Recent events (1)
  • — Z (S) $0

1926.502 B01

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $1600.00 · Current $1600.00
29 CFR 1926.502(b)(1):  The top edge height of the top rails, or equivalent guardrail system members, was not 42 inches (1.1 m) plus or minus 3 inches (8 cm) above the walking/working level:  (a)  First Story Basement Floor Opening - on or about June 14, 2014 - the height of the top rail of the guardrail system measured between 36 to 37 inches high.
Recent events (1)
  • — Z (S) $1600

1926.502 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Abate by
Penalty
Initial $0.00 · Current $0.00
29 CFR 1926.502(b)(2):  Midrails, screens, mesh, intermediate vertical members, or equivalent intermediate structure members were not installed between the top edge of the guardrail system and the walking/working surface when there was no wall or parapet wall at least 21 inches (53 cm) high:  (a)  First Story Basement Floor Opening - on or about June 14, 2014 - no midrail was installed on the guardrail system for this opening.
Recent events (1)
  • — Z (S) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339838393.