MOUNDVILLE, AL —
OSHA Inspection: C & S FABRICATION, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of C & S FABRICATION, INC. in 39194 AL HWY 69, MOUNDVILLE, AL 35474 (NAICS 333298). OSHA activity number 339838567.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- C & S FABRICATION, INC.
- Site address
- 39194 AL HWY 69
- City
- MOUNDVILLE
- State
- AL
- ZIP
- 35474
- Mailing
- 39194 AL HWY 69, MOUNDVILLE, AL 35474
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333298
- Employees
- 65
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.157 G02
- Issued
- Aug 25, 2014
- Abate by
- Sep 3, 2014
- Penalty
- Initial $2,100 · Current $1,890 Reduced
General-duty citation text
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter: a) On or about June 30, 2014 and times prior, use of fire extinguishers: The employer would expect any employee to use a fire extinguisher if they felt safe without providing initial and annual training on the use of fire extinguishers.
Recent events (2)
- — I (S) $1890
- — Z (S) $2100
1910.178 L01 II
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $4,200 · Current $1,890 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(ii): The employer did not ensure that each operator had successfully completed the training required by paragraph (l), except as permitted by paragraph (l)(5), prior to permitting an employee to operate a fork lift: a) On or about June 30, 2014 and times prior, fork lift training: The employer failed to ensure that employees were trained on forklifts.
Recent events (2)
- — I (S) $1890
- — Z (S) $4200
1910.178 L04 III
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) On or about June 30, 2014 and times prior, forklift refresher training: The employer failed to ensure an employee was evaluated every 3 years on forklifts to ensure he maintained knowledge and operating skills. b) On or about June 30, 2014 and times prior, forklift refresher training: The employer failed to ensure an employee was evaluated every 3 years on forklifts to ensure he maintained knowledge and operating skills. c) On or about June 30, 2014 and times prior, forklift refresher training: The employer failed to ensure an employee was evaluated on forklifts prior to ensure he maintained knowledge and operating skills.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 Q07
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: a) On or about June 30, 2014 and times prior, forklift daily inspection: The employer failed to ensure an employee conducted an inspection prior to operating a forklift to ensure it was in safe operating condition. b) On or about June 30, 2014 and times prior, forklift daily inspection: The employer failed to ensure an employee conducted an inspection prior to operating a forklift to ensure it was in safe operating condition. c) On or about June 30, 2014 and times prior, forklift daily inspection: The employer failed to ensure an employee conducted an inspection prior to operating a forklift to ensure it was in safe operating condition.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.1200 H03 IV
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(iv): The details of the hazard communication program developed by the employer, did not include an explanation of the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information: a) On or about June 30, 2014 and times prior, new global harmonization training: The employer failed to train employees on the new label elements and the safety data sheet (SDS) format prior to December 1, 2013.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at C & S Fabrication, INC.
View C & S Fabrication, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 333298)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339838567.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.