THEODORE, AL —
OSHA Inspection: D & G FABRICATION AND PIPE SUPPORTS
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of D & G FABRICATION AND PIPE SUPPORTS in 8703 BELLINGRATH RD., THEODORE, AL 36582 (NAICS 331221). OSHA activity number 339841082.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch D & G Fabrication and Pipe Supports — free
Get an email when a new federal OSHA severe-injury report for D & G Fabrication and Pipe Supports is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- D & G FABRICATION AND PIPE SUPPORTS
- Site address
- 8703 BELLINGRATH RD.
- City
- THEODORE
- State
- AL
- ZIP
- 36582
- Mailing
- 8703 BELLINGRATH RD., THEODORE, AL 36582
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 331221
- Employees
- 11
- Ownership type
- A
Citations
13 citations on file for this inspection.
1910.37 B02
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $1,020 · Current $800 Reduced
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit". a. The shop: On July 8, 2014 and times prior to the employer exposed employees to entrapment hazards in that an emergency exit door was not labeled "Exit".
Recent events (2)
- — I (S) $800
- — Z (S) $1020
1910.212 A01
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. a. The shop: on July 8, 2014 and times prior to the employer exposed employees to caught-in hazards, in that guards were not provided to employees while operating hydraulic press.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.215 A04
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Grinding machinery was not used with work rest(s) to support offhand grinding work. a. The shop: On July 8, 2014 and times prior to the employer exposed employees to struck by hazards in that work rest were not provided to employees while operating the grinder.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.215 B09
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch. a. The shop: On July 8, 2014 and times prior to the employer exposed employees to struck by hazards in that tongue guards were not provided to employees while operating the grinder.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.304 B04 II B
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.304(b)(4)(ii)(B): Where connected to a branch circuit supplying two or more receptacles or outlets, a receptacle may not supply a total cord- and plug-connected load in excess of the maximum specified in Table S-4. a. The shop; On July 8, 2014 the employer exposed employees to fire hazards in that an overloaded conductor was in use near employees while operating the power press.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.304 G05
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective. a. The shop: On July 8, 2014 and times prior to the employer exposed employees to shock hazards in that a continuous ground was not provided to employees while using the hydraulic power press.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.305 D02
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $1,600 · Current $800 Reduced
General-duty citation text
29 CFR 1910.305(d)(2): Panelboard enclosures. Panelboards shall be mounted in cabinets, cutout boxes, or enclosures designed for the purpose and shall be dead front. However, panelboards other than the dead front externally-operable type are permitted where accessible only to qualified persons. a. The shop: On July 8, 2014 and times prior to the employer exposed employees to shock hazards in that a dead front was not provided to employees while resetting tripped circuit breakers.
Recent events (2)
- — I (S) $800
- — Z (S) $1600
1910.178 L04 III
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years. a. The Shop: On July 8, 2014 and times prior to the employer exposed employees to struck by hazards in that forklift operator recertification was not provided to employees operating forklift.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 A02 X
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(a)(2)(x): Flexible cords and cables shall be protected from accidental damage, as might be caused, for example, by sharp corners, projections, and doorways or other pinch points. a. The Shop: On July 8, 2014 and times prior to the employer exposed employees to shock hazards in that extension cords were hung on sharp edges while employees while using press machine.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 B02 I
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy. a. The Shop: On July 8, 2014 and times prior to the employer exposed employees to shock hazards in that an outlet cover was not provided to employees while entering/exiting welding area.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.305 G01 IV A
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure. a. The shop: On July 8, 2014 and times prior to the employer failed to insure flexible cords supplying power to the hydraulic power presses were installed in a conduit.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 E01
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met. a. The Shop: On July 8, 2014 and times prior to the employer exposed employees to chemical hazards in that hazcom program was not provided to employees while performing welding task.
Recent events (2)
- — I (O) $0
- — Z (O) $0
1910.1200 H01
- Issued
- Aug 25, 2014
- Abate by
- Sep 5, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area. a. The Shop: On July 8, 2014 and times prior to the employer exposed employees to chemical hazards in that hazcom training was not provided to employees while performing welding task.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections in this industry (NAICS 331221)
Jul 14, 2026
The Mill Steel Corporation · BIRMINGHAM, AL
Jun 29, 2026
BWD Technologies LLC · DEARBORN, MI
Jun 22, 2026
Feroleto Steel Company, INC. · BRIDGEPORT, CT
Jun 1, 2026
Axial Concepts LLC. · OAK GROVE, MO
Jun 1, 2026
Dennen Steel LLC · GRAND RAPIDS, MI
More inspections in AL
Jul 24, 2026
FMV Services, LLC. · MOBILE, AL
Jul 23, 2026
Vulcan Fabricated Metals, INC. · HOMEWOOD, AL
Jul 23, 2026
Joiner Fire Sprinkler Company, INC. · HOMEWOOD, AL
Jul 23, 2026
Comfort Systems USA MID South, INC · HOMEWOOD, AL
Jul 23, 2026
Basic Drywall, INC. · HOMEWOOD, AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339841082.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.