GREEN BAY, WI ·
OSHA Inspection: RUSSEL METALS WILLIAM BAHCALL INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of RUSSEL METALS WILLIAM BAHCALL INC. in 895 HINKLE STREET, GREEN BAY, WI 54303 (NAICS 332999). OSHA activity number 339858946.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- RUSSEL METALS WILLIAM BAHCALL INC.
- Site address
- 895 HINKLE STREET
- City
- GREEN BAY
- State
- WI
- ZIP
- 54303
- Mailing
- 895 HINKLE STREET, GREEN BAY, WI 54303
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332999
- Employees
- 35
- Ownership type
- A
Citations
4 citations on file for this inspection.
1910.179 N03 I
- Issued
- Dec 15, 2014
- Abate by
- Dec 29, 2014
- Penalty
- Initial $4,500 · Current $2,700 Reduced
General-duty citation text
29 CFR 1910.179(n)(3)(i): The load was not properly balanced on the lifting device before it was lifted more than a few inches: a) The employer did not ensure that the steel plates being lifted to and from the burn table with overhead crane #4 were balanced before moving the load. A trial lift to find the load center of balance was not being performed.
Recent events (2)
- · I (S) $2700
- · Z (S) $4500
1910.303 B01 VIII
- Issued
- Dec 15, 2014
- Abate by
- Dec 29, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.303(b)(1)(viii): Electric equipment was not free from recognized hazards that are likely to cause death or serious physical harm to employees: a) On and at times prior to July 21, 2014 the employer did not ensure that splices and repairs on the power supply cord for two Walker lifting magnets used on crane #4 were protected from spinning or being struck by hazards that caused the splice to break apart and drop loads.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.179 G01 V
- Issued
- Dec 15, 2014
- Abate by
- Dec 29, 2014
- Penalty
- Initial $900 · Current $900
General-duty citation text
29 CFR 1910.179(g)(1)(v): Pendant control box(es) were not clearly marked for identification of functions: a) On or about July 21, 2014 the pedant control on the Zenar 10 ton overhead crane #4 was not clearly marked for all of the control functions.
Recent events (2)
- · I (O) $900
- · Z (O) $900
1910.179 L01
- Issued
- Dec 15, 2014
- Abate by
- Jan 11, 2015
- Penalty
- Initial $900 · Current $0 Reduced
General-duty citation text
29 CFR 1910.179(l)(1): A preventive maintenance program based on the crane manufacturer's recommendations was not established: a) On or about July 21, 2014 the employer had not established a preventative maintenance program for the Orley Meyer 10 ton overhead crane #1. b) On or about July 21, 2014 the employer had not established a preventative maintenance program for the Zenar 10 ton overhead crane #2. c) On or about July 21, 2014 the employer had not established a preventative maintenance program for Schuette 10 ton overhead crane #3. d) On or about July 21, 2014 the employer had not established a preventative maintenance program for the Zenar 10 ton overhead crane #4. e) On or about July 21, 2014 the employer had not established a preventative maintenance program for the Orley Meyer 10 ton overhead crane #5.
Recent events (2)
- · I (O) $0
- · Z (O) $900
More inspections in this industry (NAICS 332999)
More inspections in WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339858946.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.