KANSAS CITY, KS —
OSHA Inspection: JACK COOPER TRANSPORT CO., INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of JACK COOPER TRANSPORT CO., INC. in 200 E. MARLEY RD, KANSAS CITY, KS 66115 (NAICS 484121). OSHA activity number 339862401.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- JACK COOPER TRANSPORT CO., INC.
- Site address
- 200 E. MARLEY RD
- City
- KANSAS CITY
- State
- KS
- ZIP
- 66115
- Mailing
- 200 E. MARLEY RD, KANSAS CITY, KS 66115
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 484121
- Employees
- 171
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.212 A01
- Issued
- Sep 3, 2014
- Abate by
- Sep 29, 2014
- Penalty
- Initial $2,550 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by: In the warehouse, drill presses were not provided with point of operation guarding, exposing employees to a caught in and struck by hazard in the following instances: 1) The Wilton Drill Press used to drill small parts was not equipped with a point of operation guard around the rotating spindle to protect employees from the hazards of the rotating spindle and the flying chips. 2) The Rockwell Drill Press used to drill small parts was not equipped with a point of operation guard around the rotating spindle to protect employees from the hazards of the rotating spindle and the flying chips.
Recent events (2)
- — I (S) $1785
- — Z (S) $2550
1910.212 B
- Issued
- Sep 3, 2014
- Abate by
- Sep 29, 2014
- Penalty
- Initial $2,550 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: In the warehouse, bench grinders used to drill small parts were subject to tip over, because they were not secure to the floor, exposing employees to a struck by injury in the following instances: 1) The Wilton Drill Press was not secure to prevent walking or moving. 2) The Rockwell Drill Press was not secure to prevent walking or moving.
Recent events (2)
- — I (S) $1785
- — Z (S) $2550
1910.215 A04
- Issued
- Sep 3, 2014
- Abate by
- Sep 29, 2014
- Penalty
- Initial $2,550 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: In the warehouse, pedestal grinders had improperly adjusted work rests, exposing employees to a struck by injury in the following instances: 1) The pedestal grinder identified as #2 had its work rest adjusted to approximately 5/8 inch gap. 2) The Wissota pedestal grinder (#3) had its work rest adjusted to approximately 5/8 inch gap.
Recent events (2)
- — I (S) $1785
- — Z (S) $2550
1910.215 B09
- Issued
- Sep 3, 2014
- Abate by
- Sep 29, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: In the warehouse, pedestal grinders had improperly adjusted tongue guards, exposing employees to a struck by injury in the following instances: 1) The pedestal grinder identified as #2 had its tongue guard adjusted to approximately 5/8 inch gap. 2) The Wissota pedestal grinder (#3) had its tongue guard adjusted to approximately 1/2 inch gap.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.334 A02 I
- Issued
- Sep 3, 2014
- Abate by
- Sep 29, 2014
- Penalty
- Initial $2,550 · Current $1,785 Reduced
General-duty citation text
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket): The #2 pedestal grinder, which was plugged in and available for use was missing its grounding prong, exposing employees to an electrical shock.
Recent events (2)
- — I (S) $1785
- — Z (S) $2550
More inspections at Jack Cooper Transport CO., INC.
View Jack Cooper Transport CO., INC.'s full OSHA safety record →
More inspections in this industry (NAICS 484121)
More inspections in KS
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339862401.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.