OSHA Inspection: ROGELIO AMBRIZ

Issued

Nov 24, 2014

Abate by

Dec 29, 2014

Penalty

Initial $440 · Current $440

General-duty citation text

29 CFR 1903.19(c)(1):  The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated:     Rogelio Ambriz dba DPJ Construction, failed to certify to OSHA within 10 calendar days after the abatement date that each of the following cited violations had been corrected:     Citation Number                              Item Number                                    Abatement Date  01                                                           01                                                       08/29/2014  01                                                           02                                                       08/29/2014  01                                                           03                                                       09/19/2014  01                                                           04                                                       08/29/2014 02                                                           01                                                       08/29/2014    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Aug 25, 2014

Abate by

Aug 29, 2014

Penalty

Initial $3,080 · Current $3,080

General-duty citation text

29 CFR 1926.451(e)(1): Safe access was not provided to scaffold platforms when the platforms were more than 2 feet (0.6 m) above or below a point of access:           a) Employees were not provided with safe access to scaffolding from which they were required to work at an elevation of approximately 13 feet.          In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Aug 25, 2014

Abate by

Aug 29, 2014

Penalty

Initial $3,080 · Current $3,080

General-duty citation text

29 CFR 1926.451(g)(1)(i): Each employee on a boatswains' chair, catenary scaffold, float scaffold, needle beam scaffold, or ladder jack scaffold was not protected by a personal fall arrest system:         a) Employees were exposed to the hazard of falling approximately 13 feet while working from ladder jack scaffolding without the benefit of fall protection.       In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Aug 25, 2014

Abate by

Sep 19, 2014

Penalty

Initial $2,200 · Current $2,200

General-duty citation text

29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards:        a) The employer did not provide training to enable employees to recognize the hazards of falling and the procedures to be followed to eliminate or control such hazards at the worksite.    In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).

Issued

Aug 25, 2014

Abate by

Aug 29, 2014

Penalty

Initial $3,080 · Current $3,080

General-duty citation text

29 CFR 1926.1053(b)(22): Employees using ladders were carrying objects or loads that could cause the employee to lose balance and fall:       a) Employees were exposed to the hazard of falling when climbing portable ladders while carrying materials and equipment to the elevated surfaces.       In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.

Issued

Aug 25, 2014

Abate by

Aug 29, 2014

Penalty

Initial $15,400 · Current $15,400

General-duty citation text

29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501(b):          a) Employees were exposed to the hazard of falling while performing roofing work from pitched roof surfaces without the use of fall protection.            DPJ Construction, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501 (b)(13) which was contained in OSHA inspection number 943780, citation 1, item 1, and was affirmed as a final order on November 26, 2013, with respect to a worksite located at 1113 S.18th Street, Manitowoc, Wisconsin.    DPJ Construction, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1926.501 (b)(13) which was contained in OSHA inspection number 919534, citation 1, item 2, and was affirmed as a final order on September 13, 2013, with respect to a worksite located at 1120 Hamilton Ave., Manitowoc, Wisconsin.     In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification.  This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.