JACKSON, WI —
OSHA Inspection: WILLER TOOL CORPORATION
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of WILLER TOOL CORPORATION in W225 N16683 CEDAR PARK CT., JACKSON, WI 53037 (NAICS 332710). OSHA activity number 339876393.
What this inspection record means
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Watch Willer Tool Corporation — free
Get an email when a new federal OSHA severe-injury report for Willer Tool Corporation is published. One employer, no account, unsubscribe in one click.
Where did this inspection happen?
- Establishment
- WILLER TOOL CORPORATION
- Site address
- W225 N16683 CEDAR PARK CT.
- City
- JACKSON
- State
- WI
- ZIP
- 53037
- Mailing
- W225 N16683 CEDAR PARK CT., JACKSON, WI 53037
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 60
- Ownership type
- A
Citations
2 citations on file for this inspection.
1910.212 A01
- Issued
- Sep 11, 2014
- Abate by
- Apr 30, 2015
- Penalty
- Initial $2,975 · Current $2,083 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: (a) The Kuraki CNC Horizontal Boring/Milling Machine H13-25P (H13-3217) had inadequate guarding for the moving table and headstock exposing employees to struck-by and caught in hazards. Photo 19-21 (b) The Kuraki CNC Horizontal Boring/Milling Machine (KBT-3578) had inadequate guarding for the moving table and headstock exposing employees to struck-by and caught-in hazards. Photo 43-44 (c) The Kuraki CNC Horizontal Boring/Milling Machine KBT-11WDX (KBT-3244) had inadequate guarding for the moving table and headstock exposing employees to struck-by and caught-in hazards. Photo 45-46 (d) The Kuraki CNC Horizontal Boring/Milling Machine KBT-11WDX (KBT-3201) had inadequate guarding for the moving table and headstock exposing employees to struck-by and caught-in hazards. Photo 47 (e) The Kuraki CNC Horizontal Boring/Milling Machine KBT-11WDX (KBT-3224) had inadequate guarding for the moving table and headstock exposing employees to struck-by and caught-in hazards. Video 48 (f) The Kuraki CNC Horizontal Boring/Milling Machine KBT-13DX (KBT-1508) had inadequate guarding for the moving table and headstock exposing employees to struck-by and caught-in hazards. Photo 49, 50 (g) The OKK MCV 650 vertical machining center had inadequate guarding in that there were movable doors allowed employees to access the point of operation exposing employees to struck-by hazards. Photo 2 (h) The OKK MV7III vertical machining center (VM7-565) had inadequate guarding in that there were movable doors allowed employees to access the point of operation exposing employees to struck-by hazards. Photo 3-4 (i) The OKK MV7 vertical machining center (VM7-230) had inadequate guarding in that there were movable doors allowed employees to access the point of operation exposing employees to struck-by hazards. Photo 5-6 (j) The OKK MCV 560 vertical machining center (MCV-154) had inadequate guarding in that there were movable doors allowed employees to access the point of operation exposing employees to struck-by hazards. The movable doors and guard also allowed employees to reach over the top. Photo 7-8 (k) The OKK MCV 550 vertical machining center (MCV-283) had inadequate guarding in that there were movable doors allowed employees to access the point of operation exposing employees to struck-by hazards. The movable doors and guard also allowed employees to reach over the top. Photo 9-10 (l) The OKK MCV 460 vertical machining center (MCV-185) had inadequate guarding in that there were movable doors allowed employees to access the point of operation exposing employees to struck-by hazards. The movable doors and guard also allowed employees to reach over the top. Photo 11-12 (m) The OKK MVC 660 vertical machining center (MCV-404) had inadequate guarding in that there were movable doors allowed employees to access the point of operation exposing employees to struck-by hazards. The movable doors and guard also allowed employees to reach over the top. Photo 13-14 (n) The Kuraki CNC Vertical Machining Center KV-1000 (K-9676) had inadequate guarding in that there were movable doors allowed employees to access the point of operation exposing employees to struck-by hazards. The movable doors and guard also allowed employees to reach over the top. Photo 15-16 (o) The OKK MCV660 (MCV-190) vertical machining center had inadequate guarding in that there were movable doors allowed employees to access the point of operation exposing employees to struck-by hazards. The movable doors and guard also allowed employees to reach over the top. Photo 17-18 (p) The HNK Machine Tool (HB30817) had the rear door open due to the part being machine did not fit inside. This allowed employees to access the point of operation exposing employees to struck-by hazards. (q) The Kuraki AKB-13 (AKB-6507) horizontal boring/milling machine had the back doors taken off because the parts were too big and when the table rotated would stick the doors. This allowed employees to access the point of operation exposing employees to struck-by hazards.
Recent events (2)
- — I (S) $2082.5
- — Z (S) $2975
1910.147 C04 II D
- Issued
- Sep 11, 2014
- Abate by
- Oct 29, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(4)(ii)(D): The energy control procedures did not clearly and specifically outline the requirements for testing a machine or equipment to determine and verify the effectiveness of lockout devices, tagout devices, and other energy control measures: (a) The employer's Lockout/Tagout procedures for the horizontal boring bar machines did not include the steps necessary to verify the equipment was properly de-energized.
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Willer Tool Corporation
View Willer Tool Corporation's full OSHA safety record →
More inspections in this industry (NAICS 332710)
Jul 16, 2026
Omni Components Corp. · HUDSON, NH
Jul 16, 2026
111613 - FOX Engineering LLC · CAMBRIDGE, MN
Jul 16, 2026
Manson Manufacturing LLC DBA Tomco Manufacturing · WIXOM, MI
Jul 16, 2026
Four WAY Industries INC · CLAWSON, MI
Jul 16, 2026
Four WAY Industries INC · CLAWSON, MI
More inspections in WI
Jul 17, 2026
PTS Contractors, INC. · GREEN BAY, WI
Jul 16, 2026
Miron Construction CO. INC. · WAUSAU, WI
Jul 15, 2026
Wabash National Services, L.P. · ELROY, WI
Jul 15, 2026
Kings Superior Construction LLC · SUSSEX, WI
Jul 15, 2026
Teronomy Builders, INC. · DELAVAN, WI
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339876393.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.