Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,197,124Inspections Most recent open 2026-08-25 Last loaded 2026-08-28

OSHA Inspection: D. WHITELAW MECHANICAL INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of D. WHITELAW MECHANICAL INC. in HOBBS STREET, CONWAY, NH 03818 (NAICS 238220). OSHA activity number 339881716.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch D. Whitelaw Mechanical INC. for free Get an email when a new federal OSHA severe-injury report for D. Whitelaw Mechanical INC. is published. One employer, no account, unsubscribe in one click.
Site address
HOBBS STREET
City
CONWAY
State
NH
ZIP
03818
Mailing
P.O. BOX 2070, NORTH CONWAY, NH 03860
Inspection type
Planned (H)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
Non-union (B)
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238220
Employees
3
Ownership type
Private (A)

4 citations on file for this inspection.

1926.100 A

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Aug 20, 2014
Penalty
Initial $1,600 · Current $0 Reduced
29 CFR 1926.100(a): 29 CFR1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or electrical shock and burns:  (a) Jobsite - Employees were working in a trench without hard hats.
Recent events (2)
  • · I (S) $0
  • · Z (S) $1600

1926.651 C02

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Aug 20, 2014
Penalty
Initial $2,000 · Current $0 Reduced
29 CFR 1926.651(c)(2): Means of egress from trench excavations. A stairway, ladder, ramp or other safe means of egress was not located in trench excavations that are 4 feet (1.22 m) or more in depth so as to require no more than 25 feet (7.62 m) of lateral travel for employees.  (a) Jobsite - Employees were working in a seven foot deep trench without a ladder for egress.
Recent events (2)
  • · I (S) $0
  • · Z (S) $2000

1926.651 J02

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Aug 20, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.651(j)(2): Employees were not protected from excavated or other materials or equipment that could pose a hazard by falling or rolling into excavations. Protection by placing and keeping such materials or equipment at least 2 feet from the edge of excavations, or by the use of retaining devices that are sufficient to prevent materials or equipment from falling or rolling into excavations, or by a combination of both if necessary was not provided.  (a) Jobsite - The spoils piles were located directed at the edge of the trench.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.652 A01

Deleted Serious Gravity 10 1 instance 1 exposed
Issued
Aug 20, 2014
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1926.652(a)(1): Each employee in an excavation was not protected from cave-ins by an adequate protective system designed in accordance with paragraph (b) or (c) of this section:  (a) Jobsite - Employees were working a seven foot deep trench with no cave-in protection.
Recent events (2)
  • · I (S) $0
  • · Z (S) $2800

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339881716.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.