NEW YORK, NY ·
OSHA Inspection: MARK & SON METAL PRODUCTS, INC.
Unprogrammed Related inspection · Health discipline
At a glance
On , OSHA opened an unprogrammed Related health inspection of MARK & SON METAL PRODUCTS, INC. in 10 SOUTH STREET, NEW YORK, NY 10019 (NAICS 238190). OSHA activity number 339892192.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARK & SON METAL PRODUCTS, INC.
- Site address
- 10 SOUTH STREET
- City
- NEW YORK
- State
- NY
- ZIP
- 10019
- Mailing
- 333 RAILROAD AVE, BEDFORD HILLS, NY 10507
What kind of inspection was it?
- Inspection type
- Unprogrammed Related (G)
- Scope
- Partial (B)
- Discipline
- Health
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238190
- Employees
- 80
- Ownership type
- Private (A)
Citations
3 citations on file for this inspection.
1926.62 D01 I
- Issued
- Feb 3, 2015
- Abate by
- Feb 13, 2015
- Penalty
- Initial $4,900 · Current $3,500 Reduced
General-duty citation text
29 CFR 1926.62(d)(1)(i): Each employer who had a workplace or operation covered by 29 CFR 1926.62 did not initially determine if any employee was exposed to lead at or above the action level of 30 micrograms per cubic meter of air (30 ug/m3) calculated as an 8-hour time-weighted average (TWA): (a) On or about 8/8/14 at 10 South Street, employees who welded on "dirty" steel were exposed to chemical hazards from lead because the employer did not do an initial determination of these employees' lead exposure. (b) On or about 8/8/14 at 10 South Street, employees who dry swept leaded plaster floors were exposed to chemical hazards from lead because the employer did not do an initial determination of these employees' lead exposure.
Recent events (2)
- · I (S) $3500
- · Z (S) $4900
1926.62 E02 I
- Issued
- Feb 3, 2015
- Abate by
- Feb 13, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.62(e)(2)(i): The employer did not establish and implement a written compliance program to achieve compliance with 29 CFR 1926.62(c) prior to commencement of the job: (a) On or about 8/8/14 at 10 South Street, employees were exposed to chemical hazards from lead because the employer did not establish and implement a written lead compliance program prior to the start of the job where employees were exposed to lead while dry sweeping leaded plaster floors and welding on "dirty" steel.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1926.62 L02
- Issued
- Feb 3, 2015
- Abate by
- Feb 13, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.62(l)(2): The employer failed to institute a training program and ensure employee participation in the program: (a) On or about 8/8/14 at 10 South Street, employees were exposed to chemical hazards from lead because the employer did not institute a lead training program and ensure employee participation, where employees dry swept leaded plaster floors and welded on "dirty" steel.
Recent events (2)
- · I (S) $0
- · Z (S) $0
More inspections at Mark & SON Metal Products, INC.
View Mark & SON Metal Products, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238190)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339892192.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.