WEST ROXBURY, MA —
OSHA Inspection: W.M. GULLIKSEN MANUFACTURING COMPANY INCORPORATED
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of W.M. GULLIKSEN MANUFACTURING COMPANY INCORPORATED in 187 GARDNER STREET, WEST ROXBURY, MA 02132 (NAICS 326199). OSHA activity number 339912552.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- W.M. GULLIKSEN MANUFACTURING COMPANY INCORPORATED
- Site address
- 187 GARDNER STREET
- City
- WEST ROXBURY
- State
- MA
- ZIP
- 02132
- Mailing
- 187 GARDNER STREET, WEST ROXBURY, MA 02132
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 326199
- Employees
- 45
- Ownership type
- A
Citations
3 citations on file for this inspection.
1910.147 C04 I
- Issued
- Sep 2, 2014
- Abate by
- Mar 6, 2015
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: Worksite: 1) The employer did not develop lockout tagout procedures for each type of machine. 2) The employer did not lockout mold machines that a cleaning employee was working behind.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
1910.212 A01
- Issued
- Sep 2, 2014
- Abate by
- Mar 6, 2015
- Penalty
- Initial $3,500 · Current $2,450 Reduced
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Machine Shop: 1) The rotating chucks of three South Bend Lathes were not guarded. Finishing Room: 2) The spindles and grinding wheels of the Delta Drill Presses used for deburring parts were not guarded. Pill Room: 3) The motor coupling of pill machine #3 was not guarded. Mold Room: 4) The back sides of the mold machines were not guarded. 5) The pinchpoints created at Bipel Molding Machines #1, #2, and #6 during the rising of the top plates were not guarded.
Recent events (2)
- — I (S) $2450
- — Z (S) $3500
1910.219 D01
- Issued
- Sep 2, 2014
- Abate by
- Jan 21, 2015
- Penalty
- Initial $2,800 · Current $1,960 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): Machine Shop: 1) The flat belt and pulley of the small South Bend Lathe was not guarded. Finishing Room: 2) The pulley and belt drives of three Delta Drill Presses used as grinding machines were not adequately guarded.
Recent events (2)
- — I (S) $1960
- — Z (S) $2800
More inspections in this industry (NAICS 326199)
More inspections in MA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339912552.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.