Safety Incidents OSHA Severe Injury Reports · 2015–2025
2,004,209Inspections Most recent open 2026-07-13 Last loaded 2026-07-17

OSHA Inspection: THE DUPONT COMPANY

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of THE DUPONT COMPANY in 3115 RIVER ROAD, BUFFALO, NY 14207 (NAICS 326113). OSHA activity number 339919227.

Watch THE Dupont Company — free Get an email when a new federal OSHA severe-injury report for THE Dupont Company is published. One employer, no account, unsubscribe in one click.
Establishment
THE DUPONT COMPANY
Site address
3115 RIVER ROAD
City
BUFFALO
State
NY
ZIP
14207
Mailing
3115 RIVER ROAD, BUFFALO, NY 14207
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
A
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
326113
Employees
543
Ownership type
A

6 citations on file for this inspection.

1910.147 C06 I C

Serious Gravity 10 1 instance 100 exposed
Issued
Abate by
Penalty
Initial $7000.00 · Current $4900.00 Reduced
29 CFR 1910.147(c)(6)(i)(C): Where lockout was used for energy control, the periodic inspection did not include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected:    a) On or about 09/11/2014 in the Tedlar area; where the periodic inspection included procedures, but did not include a review of individual "authorized" employees  performing energy control procedures.    ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
  • — I (S) $4900
  • — Z (S) $7000

1910.147 C07 I

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $6000.00 · Current $4200.00 Reduced
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices:    a) On or about 09/04/2014 in the Tedlar casting basement; where employees performing lockout and servicing/maintenance (valve and sight glass replacement) did not identify and isolate all hazardous energy sources prior to beginning the maintenance work. The employees involved in controlling hazardous energy for this servicing/maintenance project were not adequately trained to recognize, isolate and verify (isolation of) all hazardous energy sources.     ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
  • — I (S) $4200
  • — Z (S) $6000

1910.147 D06

Serious Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $6000.00 · Current $4200.00 Reduced
29 CFR 1910.147(d)(6): Prior to starting work on machines or equipment that had been locked out or tagged out, the authorized employee did not verify that isolation and deenergization of the machine or equipment had been accomplished:     a) On or about 08/04/2014 in the Tedlar casting basement; where maintenance work to replace a valve and sight glass proceeded without verifying if there was any hazardous energy at the valve. An existing, uncontrolled energy source (hot, pressurized oil) caused burns to an employee performing the maintenance work.     NO ABATEMENT CERTIFICATION REQUIRED
Recent events (2)
  • — I (S) $4200
  • — Z (S) $6000

1910.1001 J03 I

Serious Gravity 5 1 instance 4 exposed
Issued
Abate by
Penalty
Initial $5000.00 · Current $3500.00 Reduced
29 CFR 1910.1001(j)(3)(i): The building owner, facility owner, or employer did not determine the presence, location, and quantity of ACM or PACM at the worksite and did not exercise due diligence in complying with these requirements to inform employers and employees about the presence and location of asbestos-containing material (ACM) and presumed asbestos containing material (PACM):      a) On or about 08/21/2014 in the Tedlar casting basement; where the overhead oil line in the casting basement was insulated with asbestos containing material. The insulation was not identified as asbestos containing, nor did the employees working in the area know the insulation contained asbestos.    ABATEMENT DOCUMENTATION REQUIRED
Recent events (2)
  • — I (S) $3500
  • — Z (S) $5000

1910.147 C04 II B

Repeat Gravity 5 1 instance 3 exposed
Issued
Penalty
Initial $30000.00 · Current $21000.00 Reduced
29 CFR 1910.147(c)(4)(ii)(B): The energy control procedures did not clearly and specifically outline the steps for shutting down, isolating, blocking and securing machines or equipment to control hazardous energy:    a) On or about 08/04/2014 in the Tedlar casting basement; where the "non-standard energy control procedures" did not account for the hot, pressurized oil on the "line side" of the valve which was being replaced as part of the maintenance work being conducted.    NO ABATEMENT CERTIFICATION REQUIRED    The employer, The DuPont Company, was previously cited for a violation of this occupational safety and health standard or its equivalent standard (29 CFR 1910.147(c)(4)(ii)(B)), which was contained in OSHA inspection number 315004101, citation number 1, item number 1 and was affirmed as a final order on 11/02/2011, with respect to a workplace located at 3115 River Road, Buffalo, NY 14207.
Recent events (2)
  • — I (R) $21000
  • — Z (R) $30000

1910.147 D03

Repeat Gravity 5 1 instance 2 exposed
Issued
Penalty
Initial $0.00 · Current $0.00
29 CFR 1910.147(d)(3): All energy isolating devices that were needed to control the energy to the machine or equipment was not physically located and operated in such a manner as to isolate the machine or equipment from the energy source:  a) On or about 08/04/2014 in the Tedlar casting area basement; where the source of hot, pressurized oil was not deenergized and isolated prior to initiating the maintenance work.  NO ABATEMENT CERTIFICATION REQUIRED   The employer, The DuPont Company, was previously cited for a violation of this occupational safety and health standard or its equivalent standard (29 CFR 1910.147(d)(3)), which was contained in OSHA inspection number 315004101, citation number 1, item number 2 and was affirmed as a final order on 11/02/2011, with respect to a workplace located at 3115 River Road, Buffalo, NY 14207.
Recent events (2)
  • — I (R) $0
  • — Z (R) $0

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339919227.