BLOOMSBURG, PA —
OSHA Inspection: MILCO INDUSTRIES, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of MILCO INDUSTRIES, INC. in 550 E 5TH STREET, BLOOMSBURG, PA 17815 (NAICS 315299). OSHA activity number 339928301.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MILCO INDUSTRIES, INC.
- Site address
- 550 E 5TH STREET
- City
- BLOOMSBURG
- State
- PA
- ZIP
- 17815
- Mailing
- 550 E 5TH STREET, BLOOMSBURG, PA 17815
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Complete (A)
- Discipline
- Safety
- Advance notice
- No
- Union status
- A
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 315299
- Employees
- 140
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.37 B02
- Issued
- Sep 26, 2014
- Abate by
- Oct 8, 2014
- Penalty
- Initial $2,295 · Current $0 Reduced
General-duty citation text
29 CFR 1910.37(b)(2): Each exit was not clearly visible and marked by a sign reading "Exit": a) Front Main Exit door area; An exit sign was not located on or above the main exit door notifying employees the door is an exit, on or about 08/28/2014. b) Shipping Dock Exit door area; An exit sign was not located on or above the main exit door notifying employees the door is an exit, on or about 08/28/2014. Abatement Certification Required
Recent events (2)
- — I (O) $0
- — Z (S) $2295
1910.147 C01
- Issued
- Sep 26, 2014
- Abate by
- Oct 8, 2014
- Penalty
- Initial $3,060 · Current $3,060
General-duty citation text
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: a) 550 E 5th Street, Bloomsburg, PA; Employees engaged in maintenance activities on machines were not provided with an energy control program that included employee training, energy control procedures and periodic inspections, on or about 08/28/2014. Abatement Certification Required
Recent events (2)
- — I (S) $3060
- — Z (S) $3060
1910.178 L04 III
- Issued
- Sep 26, 2014
- Abate by
- Oct 8, 2014
- Penalty
- Initial $2,295 · Current $0 Reduced
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) Shipping and Receiving area; Employees operating industrial forklifts were not evaluated at least every three years, on or about 08/28/2014. Abatement Certification Required
Recent events (2)
- — I (O) $0
- — Z (S) $2295
1910.252 B02 III
- Issued
- Sep 26, 2014
- Abate by
- Oct 8, 2014
- Penalty
- Initial $3,060 · Current $3,060
General-duty citation text
29 CFR 1910.252(b)(2)(iii): Workers and other persons adjacent to the welding area were not protected from the rays by noncombustible or flameproof screens or shields: a) Maintenance workshop area; Employees are welding metal while working adjacent to a hallway whereby employees are not shielded from absorbing ultraviolet radiation, on or about 08/28/2014. Abatement Certification Required
Recent events (2)
- — I (S) $3060
- — Z (S) $3060
1910.178 Q07
- Issued
- Sep 26, 2014
- Abate by
- Oct 8, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service daily: a) Shipping and Receiving area; Industrial forklifts are not examined at least daily before being used by employees to move material, on or about 08/28/2014. Abatement Certification Required
Recent events (2)
- — I (O) $0
- — Z (O) $0
More inspections at Milco Industries, INC.
View Milco Industries, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 315299)
More inspections in PA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339928301.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.