ROUND ROCK, TX ·
OSHA Inspection: ANGEL CEPEDA
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of ANGEL CEPEDA in 16550 RR 620 N, ROUND ROCK, TX 78681 (NAICS 238130). OSHA activity number 339928715.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- ANGEL CEPEDA
- Site address
- 16550 RR 620 N
- City
- ROUND ROCK
- State
- TX
- ZIP
- 78681
- Mailing
- 1104 HYRIDGE ST., ROUND ROCK, TX 78664
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.100 A
- Issued
- Sep 25, 2014
- Abate by
- Oct 15, 2014
- Penalty
- Initial $1,200 · Current $1,200
General-duty citation text
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: On or about August 30, 2014, and at times prior there to, employees working under suspended loads when installing trusses were not wearing hardhats, exposing employees to the hazards of being struck by falling objects.
Recent events (1)
- · Z (S) $1200
1926.501 B01
- Issued
- Sep 25, 2014
- Abate by
- Oct 15, 2014
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: On or about August 30, 2014, and at times prior thereto, employees performing framing operations were working near a leading edge in commercial construction without the use of fall protection equipment, exposing employees to the hazards of falls of 6 feet or more to the ground.
Recent events (1)
- · Z (S) $2000
1926.503 A01
- Issued
- Sep 25, 2014
- Abate by
- Oct 15, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: On or about August 30, 2014, and at times prior thereto, employees performing framing operations were working near a leading edge in commercial construction without the use of fall protection equipment, exposing employees to the hazards of falls of 6 feet or more to the ground.
Recent events (1)
- · Z (S) $0
1926.1053 B13
- Issued
- Sep 25, 2014
- Abate by
- Oct 15, 2014
- Penalty
- Initial $1,600 · Current $1,600
General-duty citation text
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: On or about August 30, 2014, and at times prior thereto, an employee was working while standing on the top of an 8 ft. portable ladder, exposing the employee to the hazards of falls.
Recent events (1)
- · Z (S) $1600
More inspections in this industry (NAICS 238130)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339928715.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.