GLENVIEW, IL ·
OSHA Inspection: MARCH MANUFACTURING, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MARCH MANUFACTURING, INC. in 1819 PICKWICK AVENUE, GLENVIEW, IL 60025 (NAICS 333911). OSHA activity number 339938664.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MARCH MANUFACTURING, INC.
- Site address
- 1819 PICKWICK AVENUE
- City
- GLENVIEW
- State
- IL
- ZIP
- 60025
- Mailing
- 1819 PICKWICK AVENUE, GLENVIEW, IL 60025
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 333911
- Employees
- 52
- Ownership type
- Private (A)
Citations
2 citations on file for this inspection.
1910.178 L04 III
- Issued
- Oct 1, 2014
- Abate by
- Oct 28, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) Facility Wide - On or about September 5, 2014, the employer failed to ensure that operators of the stand up and sit down forklifts were evaluated at least once every three years. In accordance with 29CFR 1903.19(d), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
- · Z (S) $2800
1910.212 A01
- Issued
- Oct 1, 2014
- Abate by
- Oct 28, 2014
- Penalty
- Initial $3,500 · Current $3,500
General-duty citation text
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Shop Area - On or about September 5, 2014, the Fuji lathe (s/n - 6394) was operated without being equipped with a chuck and chip guard to protect employees from hazards, such as the rotating chuck, point of operation, and flying chips. b) Shop Area - On or about September 5, 2014, the Milwaukee milling machine was operated without machine guarding to protect employees from hazards, such as those created by point of operation, ingoing nip points, and rotating parts. In accordance with 29CFR 1903.19(d), abatement certification is required for this violation (using CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement or other written records.
Recent events (1)
- · Z (S) $3500
More inspections in this industry (NAICS 333911)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339938664.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.