PATERSON, NJ ·
OSHA Inspection: FAITHFUL COUNTERTOPS LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of FAITHFUL COUNTERTOPS LLC in 190 19TH AVE, PATERSON, NJ 07504 (NAICS 327991). OSHA activity number 339946394.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- FAITHFUL COUNTERTOPS LLC
- Site address
- 190 19TH AVE
- City
- PATERSON
- State
- NJ
- ZIP
- 07504
- Mailing
- 438 RT 206 SUITE 10, HILLSBOROUGH, NJ 08844
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 327991
- Employees
- 10
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1910.178 A05
- Issued
- Oct 2, 2014
- Abate by
- Dec 30, 2014
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: a) Facility: A Hyster powered industrial truck was equipped with an Abaco forklift boom that was not a factory installed attachment, on or about 9/8/2014.
Recent events (2)
- · I (S) $1200
- · Z (S) $2000
1910.178 L01 I
- Issued
- Oct 2, 2014
- Abate by
- Oct 29, 2014
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Facility: The employer did not ensure that the operators of a powered industrial truck had successfully completed the training on the safe operation of a powered industrial truck, on or about 9/8/2014.
Recent events (2)
- · I (S) $1200
- · Z (S) $2000
1910.178 M05 I
- Issued
- Oct 2, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(m)(5)(i): When a powered industrial truck is left unattended, load engaging means were not fully lowered, controls were not neutralized, power was not shut off, and brakes set. a) Facility: A Hyster powered industrial truck was left unattended with the forks and an attached Abaco forklift boom in the elevated position approximately eight (8) feet above the ground, on or about 9/8/2014.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.304 G05
- Issued
- Oct 2, 2014
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: a) Polishing Area: A Makita grinder was used in conjunction with an electrical extension cord with a missing ground pin, on or about 9/2/2014.
Recent events (2)
- · I (S) $1200
- · Z (S) $2000
More inspections in this industry (NAICS 327991)
More inspections in NJ
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 339946394.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.