COMER, GA ·
OSHA Inspection: SUPERIOR SHAVINGS, LLC
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of SUPERIOR SHAVINGS, LLC in 890 HIGHWAY 72 EAST, COMER, GA 30629 (NAICS 321113). OSHA activity number 339980385.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- SUPERIOR SHAVINGS, LLC
- Site address
- 890 HIGHWAY 72 EAST
- City
- COMER
- State
- GA
- ZIP
- 30629
- Mailing
- 3785 HIGHWAY 29 NORTH, DANIELSVILLE, GA 30633
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321113
- Employees
- 3
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.219 C04 I
- Issued
- Nov 14, 2014
- Abate by
- Feb 11, 2015
- Penalty
- Initial $1,200 · Current $720 Reduced
General-duty citation text
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft. On 10/1/14, in the production area, employees were exposed to unguarded rotating shafts on the hopper conveyor. Shaft ends extended 3 inches and were 1 inch in diameter. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $720
- · Z (S) $1200
1910.219 D01
- Issued
- Nov 14, 2014
- Abate by
- Feb 11, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o). On 10/1/14, in the production area, pulleys on compressors running with belts were not guarded up to 1700 rpm. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $1200
- · Z (S) $2000
1910.219 E01 I
- Issued
- Nov 14, 2014
- Abate by
- Dec 11, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt. On 10/1/14, in the production area, the employer did not ensure large fans with belts and pulleys were guarded. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.219 F03
- Issued
- Nov 14, 2014
- Abate by
- Feb 11, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed. On or about 10/1/14, the chain and sprocket on the log deck conveyor was not guarded, was approximately waist height and within 12 inches of where operators are located. In accordance with 29 CFR 1903.19(c), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET).
Recent events (2)
- · I (S) $1200
- · Z (S) $2000
1910.265 C04 V
- Issued
- Nov 14, 2014
- Abate by
- Feb 11, 2015
- Penalty
- Initial $2,000 · Current $1,200 Reduced
General-duty citation text
29 CFR 1910.265(c)(4)(v): Elevated platform(s), used routinely on a daily basis were not equipped with stairway(s) or fixed ladder(s). On 10/1/2014, in the production area, employees working on platforms were exposed to fall hazards over 5 feet. A single guardrail measured 33 inches above platform levels and there was no midrail installed. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- · I (S) $1200
- · Z (S) $2000
1910.265 D03 II
- Issued
- Nov 14, 2014
- Abate by
- Feb 11, 2015
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1910.265(d)(3)(ii): Log deck(s) were not provided with adequate stops, chains, or other safeguards to prevent logs from rolling down the deck(s) onto the carriage(s) or its runway. On 10/1/14, employees were exposed to crushing hazards as log decks were not provided with safeguards to prevent logs from rolling down the decks. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (2)
- · I (S) $1680
- · Z (S) $2800
More inspections at Superior Shavings, LLC
View Superior Shavings, LLC's full OSHA safety record →
More inspections in this industry (NAICS 321113)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339980385.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.