Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,191,871Inspections Most recent open 2026-07-30 Last loaded 2026-08-03

OSHA Inspection: ROGER WEBSTER CONSTRUCTION, INC.

Planned inspection · Safety discipline

On , OSHA opened a planned safety inspection of ROGER WEBSTER CONSTRUCTION, INC. in 507 COMMUNITY DR., LINCOLN, IL 62656 (NAICS 238160). OSHA activity number 339983926.

What this inspection record means

OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Roger Webster Construction, INC. for free Get an email when a new federal OSHA severe-injury report for Roger Webster Construction, INC. is published. One employer, no account, unsubscribe in one click.
Site address
507 COMMUNITY DR.
City
LINCOLN
State
IL
ZIP
62656
Mailing
303 N. SANGAMON STREET, LINCOLN, IL 62656
Inspection type
Planned (H)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238160
Employees
17
Ownership type
A

6 citations on file for this inspection.

1926.20 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 14, 2014
Abate by
Oct 24, 2014
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s)    Employee performing sheathing activities were exposed to a fall and struck by hazards, and the employer did not conduct frequent and regular inspections of the job site, materials, and equipment.
Recent events (2)
  • · I (S) $1000
  • · Z (S) $2000

1926.100 A

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 14, 2014
Abate by
Oct 24, 2014
Penalty
Initial $2,000 · Current $1,000 Reduced
29 CFR 1926.100(a): Employees were not protected by protective helmets while working in areas where there was a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns:    Employee performing sheathing activities were exposed to the hazard of being struck in the head by falling materials and tools, and was not required to wear a hard hat while working underneath employees performing roofing activities.
Recent events (2)
  • · I (S) $1000
  • · Z (S) $2000

1926.102 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 14, 2014
Abate by
Oct 24, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.102(a)(1): Employees shall be provided with eye and face protection equipment when machines or operations present potential eye or face injury from physical, chemical, or radiation agents.  Employee performing sheathing activities were exposed to a struck by hazard in the eye when using a pneumatic nail gun and the employer did not ensure the use of suitable eye protection.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.403 B02

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 14, 2014
Abate by
Oct 24, 2014
Penalty
Initial $1,600 · Current $800 Reduced
29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification:     Employee performing sheathing activities were exposed to electrical hazards because:      a. The portable saw was plugged by an outlet box with knockouts, and      b. The extension cord was made with non-metallic sheathed electrical cable.       The equipment was not installed and used in accordance with instruction included in the listing, labeling or certification.
Recent events (2)
  • · I (S) $800
  • · Z (S) $1600

1926.404 B01 I

Serious Gravity 5 1 instance 2 exposed
Issued
Oct 14, 2014
Abate by
Oct 24, 2014
Penalty
Initial $0 · Current $0
29 CFR 1926.404(b)(1)(i): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites.  Employees performing sheathing activities were exposed to electrical hazards when using electric power tools and an extension cord because an assured equipment grounding program or ground fault circuit interrupters were not used to protect employees.
Recent events (2)
  • · I (S) $0
  • · Z (S) $0

1926.453 B02 V

Serious Gravity 10 1 instance 2 exposed
Issued
Oct 14, 2014
Penalty
Initial $2,800 · Current $1,400 Reduced
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift:    Employee performing sheathing activities from an aerial lift were exposed to a fall hazard because fall restraint or fall protection was not being used.
Recent events (2)
  • · I (S) $1400
  • · Z (S) $2800

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339983926.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.