AUSTIN, TX —
OSHA Inspection: DZ INDUSTRIES INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of DZ INDUSTRIES INC. in 4800 BULL MOUNTAIN COVE, AUSTIN, TX 78746 (NAICS 238290). OSHA activity number 339987380.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- DZ INDUSTRIES INC.
- Site address
- 4800 BULL MOUNTAIN COVE
- City
- AUSTIN
- State
- TX
- ZIP
- 78746
- Mailing
- 12106 COLWICK STREET, SAN ANTONIO, TX 78216
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- Yes
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238290
- Employees
- 3
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.20 B02
- Issued
- Dec 5, 2014
- Abate by
- Dec 19, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.20(b)(2): The employer did not initiate and maintain a safety program which provides for frequent and regular inspections of jobsites, materials, and equipment to be made by competent persons (i.e., a person who is capable of identifying existing hazards of the job site). On or about 29 September 2014, and at times prior thereto, the employer did not provide for frequent and periodic inspections of the jobsite located at 4800 Bull Mountain Cove, exposing the employees to fall hazards of as much as approximately 34 feet to the concrete basement below.
Recent events (1)
- — Z (S) $2800
1926.501 B01
- Issued
- Dec 5, 2014
- Abate by
- Dec 19, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. On or about 29 September 2014, and at times prior thereto, three employees were installing a home elevator within a private residence that required work within the elevator shaft in which fall protection was not utilized, exposing the employees to fall hazards of as much as approximately 34 feet to the concrete basement below.
Recent events (1)
- — Z (S) $2800
1926.503 A02
- Issued
- Dec 5, 2014
- Abate by
- Jan 26, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.503(a)(2): The employer did not assure that each employee exposed to fall hazards was trained by a competent person qualified in the areas specified in 29 CFR 1926.503 (a)(2)(i) through (viii). On or about 29 September 2014, and at times prior thereto, three employees were installing a home elevator within a private residence that required work within the elevator shaft at elevated heights in which the employees had not been trained in fall protection, exposing the employees to fall hazards of as much as approximately 34 feet to the concrete basement below.
Recent events (1)
- — Z (S) $0
1926.1053 B05 I
- Issued
- Dec 5, 2014
- Abate by
- Dec 19, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.1053(b)(5)(i): Non-self-supporting ladder(s) were not used at an angle such that the horizontal distance from the top support to the foot of the ladder was approximately one-quarter of the working length of the ladder (the distance along the ladder between the foot and the top support). On or about 29 September 2014, and at times prior thereto, three employees were installing a home elevator within a private residence that required work within the elevator shaft in which an extension ladder was utilized to span the shaft opening at an angle greater than 4 to 1, exposing the employees to fall hazards of as much as approximately 34 feet to the concrete basement below.
Recent events (1)
- — Z (S) $2800
More inspections at DZ Industries INC.
View DZ Industries INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238290)
More inspections in TX
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339987380.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.