Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: LENNI ELECTRIC, INC.

Federal Agency inspection · Safety discipline

On , OSHA opened a federal Agency safety inspection of LENNI ELECTRIC, INC. in 22 WINDING WAY, BOOTHWYN, PA 19061 (NAICS 238210). OSHA activity number 339995847.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Lenni Electric, INC. — free Get an email when a new federal OSHA severe-injury report for Lenni Electric, INC. is published. One employer, no account, unsubscribe in one click.
Site address
22 WINDING WAY
City
BOOTHWYN
State
PA
ZIP
19061
Mailing
1020 ANDREW DR, WEST CHESTER, PA 19380
Inspection type
Federal Agency (M)
Scope
Partial (B)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
238210
Employees
1
Ownership type
A

4 citations on file for this inspection.

1910.303 G02 I

Serious Gravity 1 1 instance 1 exposed
Issued
Apr 8, 2015
Abate by
Apr 14, 2015
Penalty
Initial $1,200 · Current $750 Reduced
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating  at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i):      a) At the Jobsite - The employer did not ensure employees were protected from live parts operating at 50 volts or more. An outlet used to power a grinder was not attached to the electrical box with an attached cover plate thus exposing employees to electrical hazards. On or about 10/09/2014.
Recent events (2)
  • — I (S) $750
  • — Z (S) $1200

1910.67 C02 VII

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 8, 2015
Abate by
Apr 14, 2015
Penalty
Initial $7,000 · Current $4,375 Reduced
29 CFR 1910.67(c)(2)(vii): Wheel chocks were not installed before using an aerial lift on an incline.      a) At the jobsite - Wheel chocks were not installed before using an Altec aerial lift truck, Ford F-650 year 2000 on an incline. An employee fell approximately thirty feet after being ejected from the aerial lift when the truck rolled. On or about 10/09/14.
Recent events (2)
  • — I (S) $4375
  • — Z (S) $7000

1910.67 C02 V

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 8, 2015
Abate by
Apr 14, 2015
Penalty
Initial $7,000 · Current $4,375 Reduced
29 CFR 1910.67(c)(2)(v): A body belt was not worn and a lanyard attached to the boom or basket when working from an aerial lift:      a) At the jobsite - An employee performing painting operations from an Altec aerial lift truck, Ford F-650 was exposed to a fall hazard of approximately thirty (30) feet without the use of a body belt or harness. On or about 10/09/2014.
Recent events (2)
  • — I (S) $4375
  • — Z (S) $7000

1910.67 C02 II

Serious Gravity 10 1 instance 1 exposed
Issued
Apr 8, 2015
Abate by
Apr 14, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.67(c)(2)(ii): An employee(s) operating an aerial lift(s) was not properly trained:   a) At the jobsite - An employee operating an Altec aerial lift truck, Ford F-650 year 2000 to perform painting activities was not trained in the safe operation of the truck, including but not limited to adjustment of the emergency brake, chocking the wheels and the use of a body belt or harness. Noted on or about 10/09/14.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

View Lenni Electric, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 339995847.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.