CUMMING, GA —
OSHA Inspection: LUIS LATERO
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of LUIS LATERO in 4875 WATERBROOKE XING, CUMMING, GA 30040 (NAICS 238170). OSHA activity number 340006006.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- LUIS LATERO
- Site address
- 4875 WATERBROOKE XING
- City
- CUMMING
- State
- GA
- ZIP
- 30040
- Mailing
- 3625 CLUD DRIVE APT.# 1312, LAWRENCEVILLE, GA 30044
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238170
- Employees
- 4
- Ownership type
- A
Citations
4 citations on file for this inspection.
1926.102 A01
- Issued
- Oct 23, 2014
- Abate by
- Nov 19, 2014
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents. On or about at 10/15/14 located at 24875 Waterbooke xing, Alpharetta, GA: Employees were observed installing siding and cutting siding on a house while using a pneumatic nail gun and the skill saw without safety glasses.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1926.304 D
- Issued
- Oct 23, 2014
- Abate by
- Nov 19, 2014
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1926.304(d): Portable, power-driven circular saw(s) were not equipped with a guard above and below the base plate or shoe: On or about 10/15/14 located at 24875 Waterbooke xing, Alpharetta, GA: Employees that were operating the skill saws used a piece of wood to wedge and hold the guard for the blade in the open position, while cutting siding.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1926.501 B13
- Issued
- Oct 23, 2014
- Abate by
- Nov 19, 2014
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): (a) NOTE TO CSHO: USE THIS OPTION ONLY IN CASES WHERE THE INFEASIBILITY/GREATER HAZARD EXCEPTION IS NOT IN ISSUE. On or about 10/15/14 located at 24875 Waterbooke xing, Alpharetta, GA: Employees installing siding on the 2nd floor while working from an unprotected floor were exposed to fall hazards of approximately up to 12 feet.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
1926.1053 B01
- Issued
- Oct 23, 2014
- Abate by
- Nov 19, 2014
- Penalty
- Initial $2,800 · Current $1,680 Reduced
General-duty citation text
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: On or about 10/15/14 located at 24875 Waterbooke xing, Alpharetta, GA: Employees were exposed to fall hazards, while performing siding work, employees were using a portable ladder to gain access to the roof, and the ladder was only 20 inches above the landing surface.
Recent events (2)
- — I (S) $1680
- — Z (S) $2800
More inspections in this industry (NAICS 238170)
More inspections in GA
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340006006.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.