Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: NIECE PRODUCTS OF KANSAS INC

Complaint inspection · Safety discipline

On , OSHA opened a complaint safety inspection of NIECE PRODUCTS OF KANSAS INC in 3904 LIBERTY BELL RD., FORT SCOTT, KS 66701 (NAICS 332420). OSHA activity number 340013119.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Niece Products of Kansas INC — free Get an email when a new federal OSHA severe-injury report for Niece Products of Kansas INC is published. One employer, no account, unsubscribe in one click.
Site address
3904 LIBERTY BELL RD.
City
FORT SCOTT
State
KS
ZIP
66701
Mailing
3904 LIBERTY BELL RD, FORT SCOTT, KS 66701
Inspection type
Complaint (B)
Scope
Complete (A)
Discipline
Safety
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
332420
Employees
42
Ownership type
A

9 citations on file for this inspection.

1910.107 C02

Serious Gravity 10 1 instance 1 exposed
Issued
Mar 6, 2015
Penalty
Initial $4,900 · Current $2,450 Reduced
29 CFR 1910.107(c)(2): An open flame or spark producing equipment was present in the spraying area or within 20 feet thereof and not separated by a partition.  In the paint booth, a paint shaker was being used to shake paint cans, exposing employees to an explosion hazard.
Recent events (2)
  • — I (S) $2450
  • — Z (S) $4900

1910.107 C06

Serious Gravity 10 1 instance 2 exposed
Issued
Mar 6, 2015
Penalty
Initial $4,900 · Current $2,450 Reduced
29 CFR 1910.107(c)(6): Electrical wiring and equipment not subject to deposits of combustible residues but located in a spraying area as herein defined were not explosion-proof type approved for     Class I, group D locations and did not otherwise conform to the provisions of subpart S of this part, for Class I, Division 1, Hazardous Locations:  In the paint booth, equipment did not meet the requirements of Class I, Division 1, Hazardous Locations, exposing employees to explosion hazards in the following instances:  1)  The "Exit" sign mounted on the inside, South Wall, of the paint booth was not Class I, Division 1.  2)  Class I, Division 1 equipment, such as the vapor proof light fixtures and conduit were not being maintained in that the fixtures were missing their vapor proof cover and the conduit was broken.
Recent events (2)
  • — I (S) $2450
  • — Z (S) $4900

1910.107 G07

Deleted Serious Gravity 1 1 instance 2 exposed
Issued
Mar 6, 2015
Abate by
Mar 30, 2015
Penalty
Initial $2,100 · Current $0 Reduced
29 CFR 1910.107(g)(7): "NO SMOKING" sign(s) in large letters on contrasting color backgrounds were not conspicuously posted at spraying area(s) and paint storage room(s):  On the exterior of the Paint Booth building, the facility was improperly marked regarding smoking, exposing employees to potential explosion and fire hazards in the following instances:  1)  On the south side of the building, a "No Smoking" sign was not posted on the outside of the building.  2)  The "No Smoking" signs on the north and east side of the building are inadequate in that the signs are faded an no longer conspicuous and no longer have a contrasting color background.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2100

1910.180 D04

Serious Gravity 1 2 instances 2 exposed
Issued
Mar 6, 2015
Abate by
Mar 30, 2015
Penalty
Initial $2,100 · Current $1,050 Reduced
29 CFR 1910.180(d)(4): Complete inspection(s) of crane(s) were not performed at intervals as generally defined in 1910.180(d)(ii) with a determination made as to whether deficiencies constituted a safety hazard:  In the yard, the Grove Truck Mounted Crane had not received a periodic inspection, exposing employees to a potential struck by hazard.
Recent events (2)
  • — I (S) $1050
  • — Z (S) $2100

1910.180 D06

Serious Gravity 1 2 instances 2 exposed
Issued
Mar 6, 2015
Abate by
Mar 30, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.180(d)(6): Monthly, dated and signed inspection records and reports for truck crane(s) were not provided for critical items such as (but not limited to) brakes, crane hooks and ropes:  In the yard, the Mobile Grove Crane had no certification record of a monthly periodic inspection, exposing employees to a potential struck by hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.219 D01

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Mar 6, 2015
Abate by
Mar 30, 2015
Penalty
Initial $2,800 · Current $0 Reduced
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o):  In the utility room in the Paint Booth, the exhaust fan belt and pulley was inadequately guarded in that the metal mesh had approximately 1 inch by 2 1/4 inch wide openings approximately 1 inch from the 3/8 inch wide belt, exposing employees to a caught in hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $2800

1910.219 E01 I

Deleted Serious Gravity 5 1 instance 1 exposed
Issued
Mar 6, 2015
Abate by
Mar 30, 2015
Penalty
Initial $0 · Current $0
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs seven feet or less from the floor level were not guarded with a guard that extended to at least fifteen inches above the belt:  In the utility room in the Paint Booth, the exhaust fan belt and pulley was inadequately guarded in that the metal mesh had approximately 1 inch by 2 1/4 inch wide openings approximately 1 inch from the 3/8 inch wide belt, exposing employees to a caught in hazard.
Recent events (2)
  • — I (S) $0
  • — Z (S) $0

1910.305 B01 II

Other-than-serious 1 instance 2 exposed
Issued
Mar 6, 2015
Abate by
Mar 30, 2015
Penalty
Initial $2,100 · Current $1,050 Reduced
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed:    In the utility room, electrical equipment had openings to live electrical equipment, exposing employees to electrical shock hazards in the following instances:    1)  The air compressor electrical service disconnect box had three openings.    2)  The air compressor power box had one opening on the top.
Recent events (2)
  • — I (O) $1050
  • — Z (S) $2100

1910.334 A02 I

Serious Gravity 1 1 instance 2 exposed
Issued
Mar 6, 2015
Abate by
Mar 30, 2015
Penalty
Initial $2,100 · Current $1,050 Reduced
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket):  In the paint booth, cord and cord connected equipment had deficiencies that were creating explosion hazards in the following instances:  1)  The paint shaker had cord sheathing fraying where it entered the shaker.  2)  An extension cord used to power the paint shaker had a broken ground prong.
Recent events (2)
  • — I (S) $1050
  • — Z (S) $2100

View Niece Products of Kansas INC's full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340013119.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.