BONIFAY, FL ·
OSHA Inspection: HOLMES TOOL & ENGINEERING, INC.
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of HOLMES TOOL & ENGINEERING, INC. in 1019 NORTH WAUKESHA STREET, BONIFAY, FL 32425 (NAICS 332710). OSHA activity number 340014000.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- HOLMES TOOL & ENGINEERING, INC.
- Site address
- 1019 NORTH WAUKESHA STREET
- City
- BONIFAY
- State
- FL
- ZIP
- 32425
- Mailing
- 1019 NORTH WAUKESHA STREET, BONIFAY, FL 32425
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 332710
- Employees
- 16
- Ownership type
- A
Citations
6 citations on file for this inspection.
1910.147 C04 I
- Issued
- Dec 12, 2014
- Penalty
- Initial $3,080 · Current $2,464 Reduced
General-duty citation text
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a. On or about October 14, 2014, the employer did not develop and utilize written specific procedures for employees operating, repairing and performing maintenance on varied pieces of equipment such as but not limited to: milling machine, lathe and CNC machines.
Recent events (2)
- · I (S) $2464
- · Z (S) $3080
1910.147 C05 II B
- Issued
- Dec 12, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(5)(ii)(B): Lockout and tagout devices were not standardized within the facility in at least one of the following criteria: color; shape; or size: a. On or about October 14, 2014, all lockout devices were not standardized within the facility. The employer had locks that were red, blue, black, green and yellow and varied in size. Some locks had numbers and were of two different manufacturer's.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.147 C06 I
- Issued
- Dec 12, 2014
- Penalty
- Initial $3,080 · Current $2,464 Reduced
General-duty citation text
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a. On or about October 14, 2014, the employer did not conduct a periodic inspection of their energy control program at least annually.
Recent events (2)
- · I (S) $2464
- · Z (S) $3080
1910.147 C07 I A
- Issued
- Dec 12, 2014
- Penalty
- Initial $3,080 · Current $2,464 Reduced
General-duty citation text
29 CFR 1910.147(c)(7)(i)(A): Authorized employee(s) did not receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control: a. On or about October 14, 2014, all authorized employees did not receive lockout tagout training.
Recent events (2)
- · I (S) $2464
- · Z (S) $3080
1910.147 C07 I B
- Issued
- Dec 12, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: a. On or about October 14, 2014, all affected employees did not receive lockout tagout training.
Recent events (2)
- · I (S) $0
- · Z (S) $0
1910.1200 H03 IV
- Issued
- Dec 12, 2014
- Abate by
- Jan 9, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.1200(h)(3)(iv): The details of the hazard communication program developed by the employer, did not include an explanation of the labels received on shipped containers and the workplace labeling system used by their employer; the safety data sheet, including the order of information and how employee could obtain and use the appropriate hazard information: a. On or about October 14, 2014, employees used hazardous chemicals such as but not limited to welding rods, Castrol oil, oxygen, acetylene and propane while working throughout the shop and the employer did not provide an explanation of the new labeling system and safety data sheets.
Recent events (2)
- · I (O) $0
- · Z (O) $0
More inspections at Holmes Tool & Engineering, INC.
View Holmes Tool & Engineering, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 332710)
More inspections in FL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340014000.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.