BOULDER, CO —
OSHA Inspection: BOCCOLUCCI BUILDING, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of BOCCOLUCCI BUILDING, INC. in 928 7TH ST., BOULDER, CO 80302 (NAICS 238130). OSHA activity number 340014554.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- BOCCOLUCCI BUILDING, INC.
- Site address
- 928 7TH ST.
- City
- BOULDER
- State
- CO
- ZIP
- 80302
- Mailing
- 58 WEDGE ROCK DR, LYONS, CO 80540
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238130
- Employees
- 4
- Ownership type
- A
Citations
1 citation on file for this inspection.
1926.304 I01
- Issued
- Oct 28, 2014
- Abate by
- Nov 21, 2014
- Penalty
- Initial $2,400 · Current $1,440 Reduced
General-duty citation text
29 CFR 1926.304(i)(1): Each circular hand-fed rip saw was not guarded by a hood which completely enclosed that portion of the saw blade above the table and that portion of the saw above the material being cut: (a)Boccolucci Building, Inc. at 928 7th St., Boulder, CO 80302: On and before October 15th, 2014, the exposing employer did not ensure that the point of operation on the Bosch model 4000 table saw, was guarded at the exposed portion of the blade to prevent employees from having any part of their body in the danger zone during operating cycles. This condition exposed the employees to the hazard of amputation while they were ripping sheets of OSB wood. Abatement Note: This particular saw is used to cut wood. To properly guard the saw: (a)Each circular hand-fed ripsaw shall be guarded by a hood. (1)The hood shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. (2)The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. (3)The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. (4)The hood shall be so mounted as to insure that its operation will be positive, reliable, and in true alignment with the saw; and the mounting shall be adequate in strength to resist any reasonable side thrust or other force tending to throw it out of line.
Recent events (2)
- — I (S) $1440
- — Z (S) $2400
More inspections at Boccolucci Building, INC.
View Boccolucci Building, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 238130)
More inspections in CO
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340014554.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.