CENTEREACH, NY ·
OSHA Inspection: S & A STEEL FABS, INC.
Referral inspection · Safety discipline
At a glance
On , OSHA opened a referral safety inspection of S & A STEEL FABS, INC. in 1759 MIDDLE COUNTRY ROAD, CENTEREACH, NY 11720 (NAICS 238120). OSHA activity number 340017284.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- S & A STEEL FABS, INC.
- Site address
- 1759 MIDDLE COUNTRY ROAD
- City
- CENTEREACH
- State
- NY
- ZIP
- 11720
- Mailing
- 119-22 101 AVE, RICHMOND HILL, NY 11418
What kind of inspection was it?
- Inspection type
- Referral (C)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- Non-union (B)
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238120
- Employees
- 6
- Ownership type
- Private (A)
Citations
4 citations on file for this inspection.
1926.21 B02
- Issued
- Nov 3, 2014
- Abate by
- Nov 21, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.21(b)(2): The employer did not instruct each employee in the recognition and avoidance of unsafe conditions and the regulations applicable to his/her environment to control or eliminate any hazards or other exposure to illness or injury: a) worksite - Employees were hoisting five, approximate 200 pound 5 inches X 5 inches by 20 feet, steel angles off the work truck without being trained; on or about 10/13/2014. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- · Z (S) $2800
1926.753 D02 III
- Issued
- Nov 3, 2014
- Abate by
- Nov 21, 2014
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1926.753(d)(2)(iii): All loads were not rigged by a qualified rigger: a) worksite - The employees rigged approximate 200 pound 5 inches X 5 inches by 20 feet steel angles to be lifted to a working level. The employees were not qualified riggers; on or about 10/13/2014. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- · Z (S) $0
1926.251 B01
- Issued
- Nov 3, 2014
- Abate by
- Nov 7, 2014
- Penalty
- Initial $2,800 · Current $2,800
General-duty citation text
29 CFR 1926.251(b)(1): Welded alloy steel chain sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and sling manufacturer: a) worksite - The employees were using a steel chain to secure a hoist for a lift that did not have permanently affixed durable identification stating size, grade, rated capacity, and sling manufacturer; on or about 10/13/2014. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- · Z (S) $2800
1926.351 C06
- Issued
- Nov 3, 2014
- Abate by
- Nov 7, 2014
- Penalty
- Initial $2,000 · Current $2,000
General-duty citation text
29 CFR 1926.351(c)(6): All ground connections shall be inspected to ensure that they are mechanically strong and electrically adequate for the required current. a) worksite - Employees were using a Lincoln Electric, Ranger 225, Serial # 4229605511, arc welder to weld steel angles together. The ground cable was damaged and covered with electrical tape; on or about 10/17/2014. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19.
Recent events (1)
- · Z (S) $2000
More inspections in this industry (NAICS 238120)
More inspections in NY
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). OSHA publishes its own view of this case as inspection number 340017284.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.