Safety Incidents OSHA Severe Injury Reports · 2015–2025
5,189,992Inspections Most recent open 2026-07-18 Last loaded 2026-07-22

OSHA Inspection: VICTORY AWNING, INC.

Complaint inspection · Health discipline

On , OSHA opened a complaint health inspection of VICTORY AWNING, INC. in 6801 OLD RANDOL MILL ROAD, FORT WORTH, TX 76120 (NAICS 314912). OSHA activity number 340019140.

What this inspection record means

OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.

Watch Victory Awning, INC. — free Get an email when a new federal OSHA severe-injury report for Victory Awning, INC. is published. One employer, no account, unsubscribe in one click.
Site address
6801 OLD RANDOL MILL ROAD
City
FORT WORTH
State
TX
ZIP
76120
Mailing
6801 OLD RANDOL MILL ROAD, FORT WORTH, TX 76120
Inspection type
Complaint (B)
Scope
Partial (B)
Discipline
Health
Advance notice
No
Union status
B
Opened
Closing conference
Case closed
Last modified
Data loaded
NAICS code
314912
Employees
40
Ownership type
A

4 citations on file for this inspection.

1910.95 G01

Other-than-serious 1 instance 2 exposed
Issued
Jan 26, 2015
Abate by
Feb 24, 2015
Penalty
Initial $3,500 · Current $2,000 Reduced
29 CFR 1910.95(g)(1):  The employer did not establish and maintain an audiometric testing program as provided in this paragraph by making audiometric testing available to all employees whose exposures equal or exceed an 8-hour time-weighted average of 85 decibels:      This violation occurred on or about October 28, 2014, in the welding department, the employer did not make audiometric testing available to employees whose noise exposure exceeded an 8-hour time weighted average of 85 decibels. Noise sampling was performed for 463 minutes indicating that employee(s) was exposed to continuous noise level at 74% noise dose which is equivalent to approximately 88 dBA.  Zero exposure was assumed for the 17 minutes not sampled.
Recent events (2)
  • — I (O) $2000
  • — Z (S) $3500

1910.157 C01

Other-than-serious 1 instance 25 exposed
Issued
Jan 26, 2015
Abate by
Feb 24, 2015
Penalty
Initial $3,500 · Current $1,400 Reduced
29 CFR 1910.157(c)(1): Portable fire extinguishers were not mounted, located and identified so that they were readily accessible without subjecting the employees to injuries:                                             This violation occurred on or about October 20, 2014, in the fuel pump area, a portable fire extinguisher was not mounted close to the storage area for flammable liquid drums which was not easily accessible to employees exposing employees to fire or explosion hazards.
Recent events (2)
  • — I (O) $1400
  • — Z (S) $3500

1910.178 Q06

Serious Gravity 5 1 instance 10 exposed
Issued
Jan 26, 2015
Abate by
Feb 24, 2015
Penalty
Initial $3,500 · Current $2,100 Reduced
29 CFR 1910.178(q)(6): Industrial truck was altered  so that the relative positions of the various parts were different from what they were when originally received from the manufacturer:        This violation occurred on or about October 20, 2014, and at times prior thereto, in the manufacturing facility, a Mitsubishi forklift fork was altered by drilling a hole that was not originally done by the manufacturer.
Recent events (2)
  • — I (S) $2100
  • — Z (S) $3500

1910.212 A01

Serious Gravity 5 1 instance 2 exposed
Issued
Jan 26, 2015
Abate by
Feb 24, 2015
Penalty
Initial $3,500 · Current $2,100 Reduced
29 CFR 1910.212(a)(1):  Machine guarding was not provided to protect operator(s) and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks:                                                                                                                 This violation occurred on or about October 20, 2014, and at times prior thereto, employees operating a LAGUN FTV-2, Type 4AV-180/80 milling machine with no guards in the welding shop were exposed to amputation and struck-by hazards.
Recent events (2)
  • — I (S) $2100
  • — Z (S) $3500

View Victory Awning, INC.'s full OSHA safety record →

This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340019140.

Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.