BAY MINETTE, AL —
OSHA Inspection: MOBILE LUMBER & MILLWORK, INC.
Complaint inspection · Safety discipline
At a glance
On , OSHA opened a complaint safety inspection of MOBILE LUMBER & MILLWORK, INC. in 2423 HWY 31 S, BAY MINETTE, AL 36507 (NAICS 321214). OSHA activity number 340021666.
OSHA opens inspections for many reasons — routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- MOBILE LUMBER & MILLWORK, INC.
- Site address
- 2423 HWY 31 S
- City
- BAY MINETTE
- State
- AL
- ZIP
- 36507
- Mailing
- 2423 HWY 31 S, BAY MINETTE, AL 36507
What kind of inspection was it?
- Inspection type
- Complaint (B)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 321214
- Employees
- 57
- Ownership type
- A
Citations
5 citations on file for this inspection.
1910.178 A04
- Issued
- Mar 24, 2015
- Penalty
- Initial $2,927 · Current $1,850 Reduced
General-duty citation text
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: a) Hyster (E47) Forklift in yard: On or about October 16, 2014 and at times prior thereto, the employer did not ensure written approval was obtained from the forklift manufacturer before allowing use of fork extenders which exposed the operator and other employees to forklift related hazards associated with forklift instability and tipping.
Recent events (2)
- — I (S) $1850
- — Z (S) $2927
1910.178 A05
- Issued
- Mar 24, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: a) Hyster Forklift (E47): On or about October 16, 2014 and at times prior thereto, the employer did not ensure the load chart for the fork extenders was obtained and posted before allowing the use of them which exposed the operator and other employees to forklift related hazards associated with forklift instability and tipping.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 A06
- Issued
- Mar 24, 2015
- Abate by
- Apr 10, 2015
- Penalty
- Initial $0 · Current $0
General-duty citation text
29 CFR 1910.178(a)(6): The employer did not ensure that all nameplates and markings were in place: a) Hyster Forklift (E47): On or about October 16, 2014 and at times prior thereto, the employer did not ensure the load chart for the manufacturer provided forks was posted and visible to the operator during use which exposed the operator and other employees to forklift related hazards associated with forklift instability and tipping.
Recent events (2)
- — I (S) $0
- — Z (S) $0
1910.178 L03
- Issued
- Mar 24, 2015
- Abate by
- Apr 10, 2015
- Penalty
- Initial $3,443 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.178(l)(3): Training program content. Powered industrial truck operators did not receive initial training in the following topics: a) Hyster Forklift (E47): On or about October 16, 2014, the employer did not ensure all the required forklift related topics were included in the operator training which exposed employees to forklift related hazards such as but not limited to fires and instability. b) Hyster 60 (E106): On or about October 16, 2014, the employer did not ensure all the required forklift related topics were included in the operator training which exposed employees to forklift related hazards such as but not limited to fires and instability. b) Caterpillar Forklift (E165): On or about October 16, 2014, the employer did not ensure all the required forklift related topics were included in the operator training which exposed employees to forklift related hazards such as but not limited to fires and instability.
Recent events (2)
- — I (S) $2500
- — Z (S) $3443
1910.178 Q07
- Issued
- Mar 24, 2015
- Abate by
- Apr 10, 2015
- Penalty
- Initial $3,443 · Current $2,500 Reduced
General-duty citation text
29 CFR 1910.178(q)(7): Industrial trucks were not examined, at least daily or before each shift if used on a round-the clock basis, before being placed into service. a) Hyster (E47) Forklift in yard: On or about October 16, 2014 and at times prior thereto, the employer did not ensure forklifts were inspected and deficiencies address prior each shift which exposed employees to forklift related hazards such as but not limited to struck by falling loads and the forklift.
Recent events (2)
- — I (S) $2500
- — Z (S) $3443
More inspections at Mobile Lumber & Millwork, INC.
View Mobile Lumber & Millwork, INC.'s full OSHA safety record →
More inspections in this industry (NAICS 321214)
More inspections in AL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340021666.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.