ELK GROVE VILLAGE, IL ·
OSHA Inspection: EMIDA INCORPORATED
Planned inspection · Safety discipline
At a glance
On , OSHA opened a planned safety inspection of EMIDA INCORPORATED in 1191 E. HIGGINS RD., ELK GROVE VILLAGE, IL 60007 (NAICS 238160). OSHA activity number 340028463.
OSHA opens inspections for many reasons: routine scheduling under a national or local emphasis program, an employee complaint or referral, or a follow-up after a reported injury. Opening or conducting an inspection is not itself an allegation or a finding that this employer broke any rule; any findings appear as the citations listed below, and citations can be contested, reduced, or withdrawn.
Where did this inspection happen?
- Establishment
- EMIDA INCORPORATED
- Site address
- 1191 E. HIGGINS RD.
- City
- ELK GROVE VILLAGE
- State
- IL
- ZIP
- 60007
- Mailing
- 10053 SEYMOUR AVE., SCHILLER PARK, IL 60176
What kind of inspection was it?
- Inspection type
- Planned (H)
- Scope
- Partial (B)
- Discipline
- Safety
- Advance notice
- No
- Union status
- B
When did the case open and close?
- Opened
- Closing conference
- Case closed
- Last modified
- Data loaded
Establishment context
- NAICS code
- 238160
- Employees
- 2
- Ownership type
- A
Citations
3 citations on file for this inspection.
1926.403 I02 I
- Issued
- Apr 20, 2015
- Abate by
- Apr 24, 2015
- Penalty
- Initial $2,800 · Current $1,000 Reduced
General-duty citation text
29 CFR 1926.403(i)(2)(i): Live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by cabinets or other forms of enclosures, nor by any of the means listed in subparagraphs (A) through (D) of this paragraph: a) on October 21 and 22, 2014, employees were exposed to electrical hazards where the Cutler-Hammer Heavy Duty HVAC Safety Switches did not have covers exposing employees to accidental contact with live parts. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- · F (S) $1000
- · C (S) $2800
- · Z (S) $2800
1926.501 B01
- Issued
- Apr 20, 2015
- Abate by
- Apr 24, 2015
- Penalty
- Initial $14,000 · Current $0 Reduced
General-duty citation text
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: a) On October 21, 2014, employees were not protected from the hazard of falling approximately 21.5 feet to the ground, while disposing roofing material from the unprotected edge of the roof. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- · F (W) $0
- · C (W) $14000
- · Z (W) $14000
1926.501 B10
- Issued
- Apr 20, 2015
- Abate by
- Apr 24, 2015
- Penalty
- Initial $14,000 · Current $5,000 Reduced
General-duty citation text
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs, with unprotected sides and edges 6 feet (1.8 m) or more above lower levels was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system: a) On October 21, 22, 24, 2014 and November 7, 2014, employees were not protected from the hazard of falling while performing roofing work on low-sloped roof with a ground to eave height of approximately 21.5 feet. In accordance with 29 CFR 1903.19(d), abatement certification is required for this violation (using the CERTIFICATION OF CORRECTIVE ACTION WORKSHEET), and in addition, documentation demonstrating that abatement is complete must be included with your certification. This documentation may include, but is not limited to, evidence of the purchase or repair of the equipment, photographic or video evidence of abatement, or other written records.
Recent events (3)
- · F (W) $5000
- · C (W) $14000
- · Z (W) $14000
More inspections at Emida Incorporated
View Emida Incorporated's full OSHA safety record →
More inspections in this industry (NAICS 238160)
More inspections in IL
Source
This record is reproduced from the U.S. Department of Labor Open Data API (OSHA inspection dataset). The original IMIS detail view is available at OSHA's Establishment Search for activity number 340028463.
Look up any company's OSHA accident reports by company, or browse severe injury reports by year, state, and company.